Hydrothermal Leaching of Silver and Aluminum from Waste Monocrystalline and Polycrystalline Photovoltaic Panels
Applied Sciences · 11.03.2023 · 13 (6) · 3602
DOI: 10.3390/app13063602 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 11.03.2023. Verfasst von Eleni Kastanaki und 3 weiteren Autor:innen. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The aim of this study was to investigate the hydrothermal leaching of silver and aluminum from waste monocrystalline silicon (m-Si) and polycrystalline silicon (p-Si) photovoltaic panels (PV) from both cells and metal ribbons using mild HNO3 solutions. Prior to leaching, pretreatment was applied to remove the fluoropolymer backsheet and thermally degrade the ethyl vinyl acetate (EVA) polymer. Several hydrothermal parameters were investigated, such as the liquid-to-solid (L/S) ratio, HNO3 concentration (N), time (t) and temperature (T). Based on preliminary tests, the HNO3 concentration was set in the range of 1–2 N to reduce hazardous waste effluents. The response surface methodology (RSM) was applied to optimize the hydrothermal leaching parameters. It was found that processing time was the most important factor for Ag leaching, followed by HNO3 concentration and L/S ratio, while the processing temperature (100–140 °C) was not a statistically significant factor. Aluminum leaching was efficient under most hydrothermal conditions. For comparison, leaching was also applied at lower temperatures of 25–45 °C for prolonged times; however, lower efficiencies were observed. Under the optimal hydrothermal conditions, Ag can be completely leached, while Al dissolution was favored at hydrothermal conditions compared with lower temperature leaching. Silver leaching efficiency was 100% under hydrothermal conditions; however, under conventional lower temperature conditions, it was 80.7–85.3% for m-Si and p-Si waste panels. Under conventional lower temperature conditions, Al leaching efficiency was 56.6–61.3% for p-Si and m-Si waste panels.
Zitieren
APA
Kastanaki, E., Lagoudakis, E., Kalogerakis, G., & Giannis, A. (2023). Hydrothermal Leaching of Silver and Aluminum from Waste Monocrystalline and Polycrystalline Photovoltaic Panels. Applied Sciences, 13(6), 3602. https://doi.org/10.3390/app13063602
Vancouver
Kastanaki E, Lagoudakis E, Kalogerakis G, Giannis A. Hydrothermal Leaching of Silver and Aluminum from Waste Monocrystalline and Polycrystalline Photovoltaic Panels. Applied Sciences. 2023;13(6):3602. doi:10.3390/app13063602
BibTeX
@article{Kastanaki2023,
author = {Kastanaki, Eleni and Lagoudakis, Emmanouel and Kalogerakis, Georgios and Giannis, Apostolos},
title = {Hydrothermal Leaching of Silver and Aluminum from Waste Monocrystalline and Polycrystalline Photovoltaic Panels},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {6},
pages = {3602},
doi = {10.3390/app13063602}
}
EUVIMED