Rescanning of Digital Impressions’ Mesh Holes: In Vivo and In Vitro Accuracy Evaluation of Three Different Scanning Protocols
Applied Sciences · 23.02.2023 · 13 (5) · 2867
DOI: 10.3390/app13052867 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 23.02.2023. Verfasst von Andrei B. Faur und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Several factors have been identified to have an influence over the accuracy of a digital impression: ambient lighting conditions, the presence of liquid on the intraoral structures, and the scanning patterns. The purpose of this study was to identify which protocol produced the most accurate digital impression regarding a one-preparation scenario in which data were acquired from a single uninterrupted scan, a rescanning of the area of interest in order to obtain more data, or the deletion of the area of interest followed by a rescan. An in vitro scenario using a typodont involving a single full-crown restoration was conceived alongside the selection of an in vivo case of a patient presenting an unrestored right mandibular first molar. The STL (standard tessellation language) reference models for each group were obtained using a high-resolution scanner (Freedom, HD; DOS). With the use of a Medit I700 (Medit, Seoul, South Korea) intraoral scanner, three different scanning protocols were conducted on the typodont and on the clinical case. The measured data (IOS scans) were sorted and further analyzed with the help of Geomagic Control X (Version:16.0.2.16496, 3D Systems, Wilsonville, OR, USA). The Kolmogorov–Smirnov test for normality was conducted on the whole set of data. The nonparametric data set underwent Kruskal–Wallis test analysis while the parametric data set underwent a one-way ANOVA test (the level of significance was set to α = 0.05). For the in vitro case, the “SINGLESCAN” group displayed the best trueness; the “DELETE&RESCAN” group displayed the best precision. Regarding the in vivo case, the “SINGLESCAN” group also displayed the best trueness; the “RESCAN” group displayed the best precision. Statistical differences were found in the trueness and precision of the IOS scans captured with the three different scanning protocols, but the differences were so small that they could be considered clinically negligible.
Zitieren
APA
Faur, A. B., Rotar, R. N., Adam, D., & Jivănescu, A. (2023). Rescanning of Digital Impressions’ Mesh Holes: In Vivo and In Vitro Accuracy Evaluation of Three Different Scanning Protocols. Applied Sciences, 13(5), 2867. https://doi.org/10.3390/app13052867
Vancouver
Faur AB, Rotar RN, Adam D, Jivănescu A. Rescanning of Digital Impressions’ Mesh Holes: In Vivo and In Vitro Accuracy Evaluation of Three Different Scanning Protocols. Applied Sciences. 2023;13(5):2867. doi:10.3390/app13052867
BibTeX
@article{Faur2023,
author = {Faur, Andrei B. and Rotar, Raul N. and Adam, Dragoș and Jivănescu, Anca},
title = {Rescanning of Digital Impressions’ Mesh Holes: In Vivo and In Vitro Accuracy Evaluation of Three Different Scanning Protocols},
journal = {Applied Sciences},
year = {2023},
volume = {13},
number = {5},
pages = {2867},
doi = {10.3390/app13052867}
}
EUVIMED