EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Application of Machine Learning for Prediction and Process Optimization—Case Study of Blush Defect in Plastic Injection Molding

Alireza Mollaei Ardestani, Ghasem Azamirad, Yasin Shokrollahi, Matteo Calaon, Jesper Henri Hattel, Murat Kulahci, Roya Soltani, Guido Tosello

Applied Sciences · 17.02.2023 · 13 (4) · 2617

DOI: 10.3390/app13042617 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 17.02.2023. Verfasst von Alireza Mollaei Ardestani und 7 weiteren Autor:innen. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: DIGIMAN4.0 project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Injection molding is one of the most important processes for the mass production of plastic parts. In recent years, many researchers have focused on predicting the occurrence and intensity of defects in injected molded parts, as well as the optimization of process parameters to avoid such defects. One of the most frequent defects of manufactured parts is blush, which usually occurs around the gate location. In this study, to identify the effective parameters on blush formation, eight design parameters with effect probability on the influence of this defect have been investigated. Using a combination of design of experiments (DOE), finite element analysis (FEA), and ANOVA, the most significant parameters have been identified (runner diameter, holding pressure, flow rate, and melt temperature). Furthermore, to provide an efficient predictive model, machine learning methods such as basic artificial neural networks, their combination with genetic algorithms, and particle swarm optimization have been applied and their performance analyzed. It was found that the basic artificial neural network (ANN), with an average accuracy error of 1.3%, provides the closest predictions to the FEA results. Additionally, the process parameters were optimized using ANOVA and a genetic algorithm, which resulted in a significant reduction in the blush defect area.

Förderung

  • DIGIMAN4.0 project

Zitieren

APA

Ardestani, A. M., Azamirad, G., Shokrollahi, Y., Calaon, M., Hattel, J. H., Kulahci, M., Soltani, R., & Tosello, G. (2023). Application of Machine Learning for Prediction and Process Optimization—Case Study of Blush Defect in Plastic Injection Molding. Applied Sciences, 13(4), 2617. https://doi.org/10.3390/app13042617

Vancouver

Ardestani AM, Azamirad G, Shokrollahi Y, Calaon M, Hattel JH, Kulahci M, et al. Application of Machine Learning for Prediction and Process Optimization—Case Study of Blush Defect in Plastic Injection Molding. Applied Sciences. 2023;13(4):2617. doi:10.3390/app13042617

BibTeX
@article{Ardestani2023,
  author = {Ardestani, Alireza Mollaei and Azamirad, Ghasem and Shokrollahi, Yasin and Calaon, Matteo and Hattel, Jesper Henri and Kulahci, Murat and Soltani, Roya and Tosello, Guido},
  title = {Application of Machine Learning for Prediction and Process Optimization—Case Study of Blush Defect in Plastic Injection Molding},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {4},
  pages = {2617},
  doi = {10.3390/app13042617}
}
Kostenlos starten →