EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal-Hydraulic-Mechanical Coupling Simulation of CO2 Enhanced Coalbed Methane Recovery with Regards to Low-Rank but Relatively Shallow Coal Seams

Qianqian Ma, Hong Li, Kun Ji, Fengjun Huang

Applied Sciences · 17.02.2023 · 13 (4) · 2592

DOI: 10.3390/app13042592 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 17.02.2023. Verfasst von Qianqian Ma und 3 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Ministry of Science and Technology of China through High-end Foreign Specialist Introduction Program, Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CO2 injection technology into coal seams to enhance CH4 recovery (CO2-ECBM), therefore presenting the dual benefit of greenhouse gas emission reduction and clean fossil energy development. In order to gaze into the features of CO2 injection’s influence on reservoir pressure and permeability, the Thermal-Hydraulic-Mechanical coupling mechanism of CO2 injection into the coal seam is considered for investigation. The competitive adsorption, diffusion, and seepage flowing of CO2 and CH4 as well as the dynamic evolution of fracture porosity of coal seams are considered. Fluid physical parameters are obtained by the fitting equation using MATLAB to call EOS software Refprop. Based on the Canadian CO2-ECBM project CSEMP, the numerical simulation targeting shallow low-rank coal is carried out, and the finite element method is used in the software COMSOL Multiphysics. Firstly, the direct recovery (CBM) and CO2-ECBM are compared, and it is confirmed that the injection of CO2 has a significant improvement effect on methane production. Secondly, the influence of injection pressure and temperature is discussed. Increasing the injection pressure can increase the pressure difference in the reservoir in a short time, so as to improve the CH4 production and CO2 storage. However, the increase in gas injection pressure will also lead to the rapid attenuation of near-well reservoir permeability, resulting in the weakening of injection capacity. Also, when the injection temperature increases, the CO2 concentration is relatively reduced, and the replacement effect on CH4 is weakened, resulting in a slight decrease in CBM production and CO2 storage.

Förderung

  • Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences
  • Ministry of Science and Technology of China through High-end Foreign Specialist Introduction Program
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Ma, Q., Li, H., Ji, K., & Huang, F. (2023). Thermal-Hydraulic-Mechanical Coupling Simulation of CO2 Enhanced Coalbed Methane Recovery with Regards to Low-Rank but Relatively Shallow Coal Seams. Applied Sciences, 13(4), 2592. https://doi.org/10.3390/app13042592

Vancouver

Ma Q, Li H, Ji K, Huang F. Thermal-Hydraulic-Mechanical Coupling Simulation of CO2 Enhanced Coalbed Methane Recovery with Regards to Low-Rank but Relatively Shallow Coal Seams. Applied Sciences. 2023;13(4):2592. doi:10.3390/app13042592

BibTeX
@article{Ma2023,
  author = {Ma, Qianqian and Li, Hong and Ji, Kun and Huang, Fengjun},
  title = {Thermal-Hydraulic-Mechanical Coupling Simulation of CO2 Enhanced Coalbed Methane Recovery with Regards to Low-Rank but Relatively Shallow Coal Seams},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {4},
  pages = {2592},
  doi = {10.3390/app13042592}
}
Kostenlos starten →