EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Numerical Investigations on Curing a Polyester-Based Powder Coating by Catalytic Infrared Radiation

Yindong Yuan, Song Pan, Tongzhao Wang, Liang Xia, Yiqiao Liu, Xinru Wang, Lei Li, Tian Wang

Applied Sciences · 08.02.2023 · 13 (4) · 2187

DOI: 10.3390/app13042187 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 08.02.2023. Verfasst von Yindong Yuan und 7 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 13th Five-Year National Science and Technology Major Project of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Catalytic combustion can effectively and cleanly convert the chemical energy of fossil fuels into infrared radiation energy. However, there is little research on the use of this technology to cure powder coatings. Therefore, catalytic infrared heating equipment based on a Pt/Al2O3 noble metal catalyst was designed, constructed, and tested in this study. The optimal curing parameters for the catalytic infrared curing process for powder coatings were determined via experiments at 220 °C for 3 min and 230 °C for 2 min. As the curing temperature increased and the curing time increased, the mechanical properties of the coating were found to improve. However, the gloss of the coating was reduced and the color darkened. A one-dimensional heat transfer model was developed to investigate the heat transfer process for powder coatings. This study introduced an internal heat source for the first time, and the heat transfer process for polyester-based powder coatings with different substrate thicknesses was numerically simulated. The numerical simulations demonstrated that the efficiency of the heat transfer between the catalytic infrared gas supply and the coating surface was 0.4. When the substrate thickness was 1 mm, the coating was most rapidly cured at 230 °C. When the substrate thickness was ≥2 mm, the most rapid curing occurred at 220 °C.

Förderung

  • 13th Five-Year National Science and Technology Major Project of China
  • National Natural Science Foundation of China

Zitieren

APA

Yuan, Y., Pan, S., Wang, T., Xia, L., Liu, Y., Wang, X., Li, L., & Wang, T. (2023). Experimental and Numerical Investigations on Curing a Polyester-Based Powder Coating by Catalytic Infrared Radiation. Applied Sciences, 13(4), 2187. https://doi.org/10.3390/app13042187

Vancouver

Yuan Y, Pan S, Wang T, Xia L, Liu Y, Wang X, et al. Experimental and Numerical Investigations on Curing a Polyester-Based Powder Coating by Catalytic Infrared Radiation. Applied Sciences. 2023;13(4):2187. doi:10.3390/app13042187

BibTeX
@article{Yuan2023,
  author = {Yuan, Yindong and Pan, Song and Wang, Tongzhao and Xia, Liang and Liu, Yiqiao and Wang, Xinru and Li, Lei and Wang, Tian},
  title = {Experimental and Numerical Investigations on Curing a Polyester-Based Powder Coating by Catalytic Infrared Radiation},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {4},
  pages = {2187},
  doi = {10.3390/app13042187}
}
Kostenlos starten →