EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of Mechanical Excavation Characteristics by Pre-Cutting Machine Based on Linear Cutting Tests

Han-eol Kim, Sang-gui Ha, Hafeezur Rehman, Han-kyu Yoo

Applied Sciences · 16.01.2023 · 13 (2) · 1205

DOI: 10.3390/app13021205 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 16.01.2023. Verfasst von Han-eol Kim und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mechanical methods of tunnel excavation are widely used because of their high excavation output, and the selection of appropriate technology depends on ground composition and project-related features. Compared with tunnel boring machines (TBMs) and roadheaders, mechanical pre-cutting machines are used in tunnel widening and have proven to be reliable in tunnel capacity expansion. Compared to other machines, the excavation characteristics of pre-cutting machines are not systematically analyzed because of their rare use. In this study, the excavation characteristics of a pre-cutting machine are analyzed in a laboratory based on linear cutting tests performed on four rock specimens with different uniaxial compressive strengths. During testing, changes in tool forces, cutting volume, and specific energy are determined while maintaining different penetration depths, spacings, and rock strengths. The variations in these variables are selected accordingly. The results showed high similarity with the case of TBMs and roadheaders. However, in the excavation by the pre-cutting machine, the ratios of the peak-to-mean cutting forces and cutting-to-normal forces reached a maximum value at a specific s/p (spacing and penetration ratio), which is related to the optimal cutting conditions. This study can provide useful information for the operation and design of pre-cutting machines.

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Kim, H., Ha, S., Rehman, H., & Yoo, H. (2023). Analysis of Mechanical Excavation Characteristics by Pre-Cutting Machine Based on Linear Cutting Tests. Applied Sciences, 13(2), 1205. https://doi.org/10.3390/app13021205

Vancouver

Kim H, Ha S, Rehman H, Yoo H. Analysis of Mechanical Excavation Characteristics by Pre-Cutting Machine Based on Linear Cutting Tests. Applied Sciences. 2023;13(2):1205. doi:10.3390/app13021205

BibTeX
@article{Kim2023,
  author = {Kim, Han-eol and Ha, Sang-gui and Rehman, Hafeezur and Yoo, Han-kyu},
  title = {Analysis of Mechanical Excavation Characteristics by Pre-Cutting Machine Based on Linear Cutting Tests},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {2},
  pages = {1205},
  doi = {10.3390/app13021205}
}
Kostenlos starten →