EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Utility of Ultrasonic Pulse Velocity for Estimating the Overall Mechanical Behavior of Recycled Aggregate Self-Compacting Concrete

Ana B. Espinosa, Víctor Revilla-Cuesta, Marta Skaf, Flora Faleschini, Vanesa Ortega-López

Applied Sciences · 08.01.2023 · 13 (2) · 874

DOI: 10.3390/app13020874 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 08.01.2023. Verfasst von Ana B. Espinosa und 4 weiteren Autor:innen. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spanish Ministry of Universities, Junta de Castilla y León, University of Burgos.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultrasonic pulse velocity (UPV) is a non-destructive measurement technique with which the quality of any concrete element can be evaluated. It provides information on concrete health and for assessing the need for repair in a straightforward manner. In this paper, the relationship is studied between UPV readings and the mechanical behavior of self-compacting concrete (SCC) containing coarse, fine, and/or powdery RA. To do so, correlations and simple- and multiple-regression relationships between compressive strength, modulus of elasticity, splitting tensile strength, flexural strength, and UPV readings of nine SCC mixes were assessed. The correlations showed that the relationship of UPV with any mechanical property was fundamentally monotonic. The inverse square-root model was therefore the best-fitting simple-regression model for all the mechanical properties, although for bending-tensile-behavior-related properties (splitting tensile strength and flexural strength) the estimation accuracy was much lower than for compressive-behavior-related properties (compressive strength and modulus of elasticity). Linear-combination multiple-regression models showed that the properties related to bending-tensile behavior had a minimal influence on the UPV value, and that their introduction resulted in a decreased estimation accuracy. Thus, the multiple-regression models with the best fits were those that linked the compressive-behavior-related properties to the UPV readings. This therefore enables the estimation of the modulus of elasticity when the UPV and compressive strength are known with a deviation of less than ±20% in 87% of the SCC mixes reported in other studies available in the literature.

Förderung

  • Spanish Ministry of Universities
  • Junta de Castilla y León
  • University of Burgos

Zitieren

APA

Espinosa, A. B., Revilla-Cuesta, V., Skaf, M., Faleschini, F., & Ortega-López, V. (2023). Utility of Ultrasonic Pulse Velocity for Estimating the Overall Mechanical Behavior of Recycled Aggregate Self-Compacting Concrete. Applied Sciences, 13(2), 874. https://doi.org/10.3390/app13020874

Vancouver

Espinosa AB, Revilla-Cuesta V, Skaf M, Faleschini F, Ortega-López V. Utility of Ultrasonic Pulse Velocity for Estimating the Overall Mechanical Behavior of Recycled Aggregate Self-Compacting Concrete. Applied Sciences. 2023;13(2):874. doi:10.3390/app13020874

BibTeX
@article{Espinosa2023,
  author = {Espinosa, Ana B. and Revilla-Cuesta, Víctor and Skaf, Marta and Faleschini, Flora and Ortega-López, Vanesa},
  title = {Utility of Ultrasonic Pulse Velocity for Estimating the Overall Mechanical Behavior of Recycled Aggregate Self-Compacting Concrete},
  journal = {Applied Sciences},
  year = {2023},
  volume = {13},
  number = {2},
  pages = {874},
  doi = {10.3390/app13020874}
}
Kostenlos starten →