EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rotational Stability in a Feline Sacroiliac Luxation Model: Biomechanical Comparison of Cannulated Compression Headless Screws and Cortical Screws Applied in Positional or Lag Fashion

Jana Klement, Josef Wieser iD, Christoph Thorwächter iD, Yury Zablotski iD, Nina Dorothee Lorenz, Susanne Lauer iD, Matthias Kornmayer

Animals · 21.05.2026 · 16 (10) · 1564

DOI: 10.3390/ani16101564 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Animals, online erschienen am 21.05.2026. Verfasst von Jana Klement und 6 weiteren Autor:innen. Beteiligte Einrichtung: Veterinary Practice Dr. Zauscher, 85235 Odelzhausen, Germany. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The purpose of this study was to compare the rotational stability of cannulated compression headless screws (CCHSs) with cortical positional and lag screws in a simulated cadaveric feline sacroiliac luxation (SIL) model. Thirty-six cadavers of domestic short-haired cats were assigned to three groups. A unilateral SIL model was stabilized using either a single 2.5 mm CCHS, a 2.4 mm cortical positional screw (PS) or lag screw (LS), each engaging 60% of the sacral width. The pelves were mounted in a mechanical testing machine and loaded through the acetabulum to simulate ground reaction forces. Constant displacement was applied at 0.5 mm/s until maximal failure occurred. Yield load, ultimate load, stiffness, and failure modes were compared among the three groups. At the yield load, a statistical trend was observed among the groups, and pairwise comparison showed a significant difference between CCHS and PS. However, no significant differences were identified among the groups for yield load, ultimate load, or stiffness. All specimens failed due to screw loosening, and failure modes differed between CCHSs and cortical screws. Overall, CCHSs and cortical screws placed in a positional or lag fashion showed comparable rotational stability under the single load-to-failure conditions used in this feline SIL model. These findings question the biomechanical advantage of compression screws regarding rotational strength in unilateral feline SIL.

Schlagwörter

Stichwörter der Autor:innen

biomechanical studycatfelineheadless compression screwlag screwpositional screwrotational stabilitysacroiliac luxation

Autor:innen und Institutionen

  • Veterinary Practice Dr. Zauscher, 85235 Odelzhausen, Germany.
  • Department of Orthopedics and Trauma Surgery, Musculoskeletal University Center Munich (MUM), University Hospital, LMU Munich, 81377 Munich, Germany.
  • LMU Small Animal Clinic, Centre for Clinical Veterinary Medicine, Ludwig-Maximilians-Universität, 80539 Munich, Germany.
  • Northern Rivers Veterinary Specialists, Bangalow, NSW 2479, Australia.

ORCID-Profile: Josef Wieser, Christoph Thorwächter, Yury Zablotski, Susanne Lauer

Zitieren

APA

Klement, J., Wieser, J., Thorwächter, C., Zablotski, Y., Lorenz, N. D., Lauer, S., & Kornmayer, M. (2026). Rotational Stability in a Feline Sacroiliac Luxation Model: Biomechanical Comparison of Cannulated Compression Headless Screws and Cortical Screws Applied in Positional or Lag Fashion. Animals, 16(10), 1564. https://doi.org/10.3390/ani16101564

Vancouver

Klement J, Wieser J, Thorwächter C, Zablotski Y, Lorenz ND, Lauer S, et al. Rotational Stability in a Feline Sacroiliac Luxation Model: Biomechanical Comparison of Cannulated Compression Headless Screws and Cortical Screws Applied in Positional or Lag Fashion. Animals. 2026;16(10):1564. doi:10.3390/ani16101564

BibTeX
@article{Klement2026,
  author = {Klement, Jana and Wieser, Josef and Thorwächter, Christoph and Zablotski, Yury and Lorenz, Nina Dorothee and Lauer, Susanne and Kornmayer, Matthias},
  title = {Rotational Stability in a Feline Sacroiliac Luxation Model: Biomechanical Comparison of Cannulated Compression Headless Screws and Cortical Screws Applied in Positional or Lag Fashion},
  journal = {Animals},
  year = {2026},
  volume = {16},
  number = {10},
  pages = {1564},
  doi = {10.3390/ani16101564}
}
Kostenlos starten →