EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Experimental Validation of a Dual-Channel High-Voltage Excitation Circuit for Capacitive Ultrasonic Transducers

Manlius C. T. S. Rocha, Carlos A. B. Reyna, Flávio Buiochi

Analog · 2026

DOI: 10.3390/analog1010005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Analog, 2026. Verfasst von Manlius C. T. S. Rocha und 2 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Conselho Nacional de Desenvolvimento Científico e Tecnológico.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a low-cost, high-voltage excitation circuit (EC) for capacitive ultra-sonic transducers (CUTs) based on a dual-path architecture. The proposed design comprises two independent AC excitation channels (AC-branch) that share a regulated DC-bias voltage (DC-branch). The circuit was developed to satisfy a fundamental operational requirement of CUTs: simultaneous application of a static bias voltage and a time-varying drive voltage. Because the electrostatic force depends nonlinearly on the applied voltage, efficient first-harmonic actuation requires the superposition of DC and AC voltage components. To reach this objective, the circuit and the transducer must be treated as a coupled electrical, electrostatic, mechanical, and acoustic system. In the proposed implementation, the DC-branch uses a TL494-PWM controller, a TIP50 switching transistor, a step-up transformer, and a rectifier-filter stage to generate the high-voltage bias of up to 200 VDC. Each AC-channel employs an LM3886TF amplifier followed by a 1:15 step-up transformer, enabling the generation of excitation signals of up 180 Vpeak. A key feature of the proposed architecture is the electrical independence of the two AC-channels, which allows for distinct excitation frequencies with minimal mutual interference. Experimental validation, performed with and without ultrasonic loads, demonstrates the relation between excitation conditions and the acoustic performance of the CUTs.

Förderung

  • Conselho Nacional de Desenvolvimento Científico e Tecnológico

Zitieren

APA

Rocha, M. C. T. S., Reyna, C. A. B., & Buiochi, F. (2026). Design and Experimental Validation of a Dual-Channel High-Voltage Excitation Circuit for Capacitive Ultrasonic Transducers. Analog. https://doi.org/10.3390/analog1010005

Vancouver

Rocha MCTS, Reyna CAB, Buiochi F. Design and Experimental Validation of a Dual-Channel High-Voltage Excitation Circuit for Capacitive Ultrasonic Transducers. Analog. 2026. doi:10.3390/analog1010005

BibTeX
@article{Rocha2026,
  author = {Rocha, Manlius C. T. S. and Reyna, Carlos A. B. and Buiochi, Flávio},
  title = {Design and Experimental Validation of a Dual-Channel High-Voltage Excitation Circuit for Capacitive Ultrasonic Transducers},
  journal = {Analog},
  year = {2026},
  doi = {10.3390/analog1010005}
}
Kostenlos starten →