Delay Locked Loop Based on Sawtooth Waveforms
Analog · 2025
DOI: 10.3390/analog1010001 ↗Kurz gefasst
Fachartikel in der Zeitschrift Analog, 2025. Verfasst von Andres Ayes und 1 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, Department of Energy under FOA.
Abstract (Originalsprache)
Reliable timing is a crucial issue in all synchronous systems. Delay locked loops are capable of dynamically synchronizing clock signals; the increasing speed of deeply scaled technologies however leads to long and complex delay lines. In this paper, a sawtooth-based delay locked loop is proposed to address the increasing difficulty of delay generation in high speed systems. The proposed architecture replaces a conventional delay line with a sawtooth waveform-based mechanism for delay generation, reducing the need for numerous delay elements. The timing offset is mapped to a voltage level on the sawtooth waveform, where the required delay is the time to cross this voltage level. The architecture, evaluated using a 7 nm device model, achieves a locking speed as low as four cycles for a 1 GHz clock signal. The DLL achieves a full period locking range, lowers the clock skew to 16 ps at room temperature, and exhibits 65 ps clock skew variations over extreme temperature corners.
Förderung
- National Science Foundation
- Department of Energy under FOA
Zitieren
APA
Ayes, A., & Friedman, E. G. (2025). Delay Locked Loop Based on Sawtooth Waveforms. Analog. https://doi.org/10.3390/analog1010001
Vancouver
Ayes A, Friedman EG. Delay Locked Loop Based on Sawtooth Waveforms. Analog. 2025. doi:10.3390/analog1010001
BibTeX
@article{Ayes2025,
author = {Ayes, Andres and Friedman, Eby G.},
title = {Delay Locked Loop Based on Sawtooth Waveforms},
journal = {Analog},
year = {2025},
doi = {10.3390/analog1010001}
}
EUVIMED