EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Modification of Multicomponent Ti-Ta-Zr-Nb Alloys by Plasma Electrolytic Oxidation

Nahuel Eduardo Spallanzani, Mariana Correa Rossi, Felype Narciso de Mattos, Conrado Ramos Moreira Afonso, Pedro Akira Bazaglia Kuroda

Alloys · 23.06.2026 · 5 (3) · 14

DOI: 10.3390/alloys5030014 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Alloys, online erschienen am 23.06.2026. Verfasst von Nahuel Eduardo Spallanzani und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Brazilian agencies CNPq, FAPESP.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Quaternary β-Ti-xTa-xZr-xNb (TTZN) alloys (x = 10, 20, and 30 wt%) were surface-modified by plasma electrolytic oxidation (PEO) to improve their surface properties. This treatment promotes the incorporation of bioactive ions, such as Ca and P, and favors the formation of a porous anodic surface resulting from the oxidation of the precursor metals. This study investigated how the addition of alloying elements (Zr, Ta, and Nb) influences oxide formation, PEO-induced pore morphology, wettability, and coating hardness. The surfaces were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS), Vickers microhardness testing, and wettability analysis. XRD analysis revealed that the TTZN10 alloy exhibited crystalline TiO2 phases in the form of anatase and rutile. In contrast, the TTZN20 and TTZN30 alloys exhibited only cubic ZrO2 diffraction peaks, while no TiO2 peaks were detected within the detection limits of the XRD technique. Micrographs showed micrometric pores on all alloy surfaces. The TTZN20 alloy exhibited the highest porosity (31.8%), which correlated with lower hydrophilicity (θ = 79°) and high surface free energy (67 mJ/m2). After PEO treatment, all surfaces exhibited high hardness values ranging from 491 to 561 HV. The highest hardness was observed for TTZN10, attributed to the mixed anatase/rutile TiO2 phase composition.

Förderung

  • Brazilian agencies CNPq
  • FAPESP

Zitieren

APA

Spallanzani, N. E., Rossi, M. C., Mattos, F. N. D., Afonso, C. R. M., & Kuroda, P. A. B. (2026). Surface Modification of Multicomponent Ti-Ta-Zr-Nb Alloys by Plasma Electrolytic Oxidation. Alloys, 5(3), 14. https://doi.org/10.3390/alloys5030014

Vancouver

Spallanzani NE, Rossi MC, Mattos FND, Afonso CRM, Kuroda PAB. Surface Modification of Multicomponent Ti-Ta-Zr-Nb Alloys by Plasma Electrolytic Oxidation. Alloys. 2026;5(3):14. doi:10.3390/alloys5030014

BibTeX
@article{Spallanzani2026,
  author = {Spallanzani, Nahuel Eduardo and Rossi, Mariana Correa and Mattos, Felype Narciso de and Afonso, Conrado Ramos Moreira and Kuroda, Pedro Akira Bazaglia},
  title = {Surface Modification of Multicomponent Ti-Ta-Zr-Nb Alloys by Plasma Electrolytic Oxidation},
  journal = {Alloys},
  year = {2026},
  volume = {5},
  number = {3},
  pages = {14},
  doi = {10.3390/alloys5030014}
}
Kostenlos starten →