EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure Evolution and Mechanical Performance of AA6061-7075 Heterogeneous Composite Fabricated via Additive Friction Stir Deposition

Qian Qiao, Hongchang Qian, Zhong Li, Dawei Guo, Chi Tat Kwok, Shufei Jiang, Dawei Zhang, Lam Mou Tam

Alloys · 30.09.2025 · 4 (4) · 21

DOI: 10.3390/alloys4040021 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Alloys, online erschienen am 30.09.2025. Verfasst von Qian Qiao und 7 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Development Fund (FDCT) of Macau SAR, National Key Research and Development Program of China, Joint Fund of Basic and Applied Basic Research Fund of Guangdong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An AA6061-7075 composite with a heterogeneous structure was fabricated via the additive friction stir deposition (AFSD) method, and in situ processing data were monitored during the manufacturing process. The results show that the cross-section of the composite subjected to AFSD exhibits a lower degree of plastic deformation behavior compared to the surface and side of the composite, owing to serious heat accumulation during the layer-by-layer stacking process. The denser, heterogeneous structure, consisting of finer (softer) and coarser (harder) grains, which correspond to AA6061 and AA7075, was formed according to transmission electron microscopy (TEM) analysis. Furthermore, the obtained composite subjected to AFSD in this work presents outstanding mechanical properties compared to other as-fabricated AA6061/AA7075 depositions acquired by other additive manufacturing methods along the horizontal building direction, with the ultimate tensile strength (266 MPa) being 89% of that of AA6061-T6 and the elongation 1.1 times that of AA7075-T6. The findings provide useful guidelines for the in situ preparation of Al-based composites and offer ideas for manufacturing high-strength heterostructures for large-scale practical engineering applications.

Förderung

  • Science and Technology Development Fund (FDCT) of Macau SAR
  • National Key Research and Development Program of China
  • Joint Fund of Basic and Applied Basic Research Fund of Guangdong Province

Zitieren

APA

Qiao, Q., Qian, H., Li, Z., Guo, D., Kwok, C. T., Jiang, S., Zhang, D., & Tam, L. M. (2025). Microstructure Evolution and Mechanical Performance of AA6061-7075 Heterogeneous Composite Fabricated via Additive Friction Stir Deposition. Alloys, 4(4), 21. https://doi.org/10.3390/alloys4040021

Vancouver

Qiao Q, Qian H, Li Z, Guo D, Kwok CT, Jiang S, et al. Microstructure Evolution and Mechanical Performance of AA6061-7075 Heterogeneous Composite Fabricated via Additive Friction Stir Deposition. Alloys. 2025;4(4):21. doi:10.3390/alloys4040021

BibTeX
@article{Qiao2025,
  author = {Qiao, Qian and Qian, Hongchang and Li, Zhong and Guo, Dawei and Kwok, Chi Tat and Jiang, Shufei and Zhang, Dawei and Tam, Lam Mou},
  title = {Microstructure Evolution and Mechanical Performance of AA6061-7075 Heterogeneous Composite Fabricated via Additive Friction Stir Deposition},
  journal = {Alloys},
  year = {2025},
  volume = {4},
  number = {4},
  pages = {21},
  doi = {10.3390/alloys4040021}
}
Kostenlos starten →