EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characteristics of Separations in Fracture After Crack Tip Opening Displacement Tests of Low-Carbon Microalloyed Offshore Steel S460MLO

Eugene Goli-Oglu, Marco Palombo, Andrei Filatov

Alloys · 23.04.2025 · 4 (2) · 6

DOI: 10.3390/alloys4020006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Alloys, online erschienen am 23.04.2025. Verfasst von Eugene Goli-Oglu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Using the results from testing industrial batches of 23 mm steel heavy plates after thermomechanical rolling and subsequent post-weld heat treatment, the patterns of fatigue crack formation in the fracture specimens during CTOD (Crack Tip Opening Displacement) testing for fracture toughness are investigated. Visual, microstructural, and fractographic studies of the nature of fracture formation and the surface of the secondary separations have been conducted. The probable causes of the manifestation of the potential “pop-in” effect on the load–displacement diagrams of the notch opening displacement are described, as well as its potentially negative impact on the interpretation of test results.

Zitieren

APA

Goli-Oglu, E., Palombo, M., & Filatov, A. (2025). Characteristics of Separations in Fracture After Crack Tip Opening Displacement Tests of Low-Carbon Microalloyed Offshore Steel S460MLO. Alloys, 4(2), 6. https://doi.org/10.3390/alloys4020006

Vancouver

Goli-Oglu E, Palombo M, Filatov A. Characteristics of Separations in Fracture After Crack Tip Opening Displacement Tests of Low-Carbon Microalloyed Offshore Steel S460MLO. Alloys. 2025;4(2):6. doi:10.3390/alloys4020006

BibTeX
@article{GoliOglu2025,
  author = {Goli-Oglu, Eugene and Palombo, Marco and Filatov, Andrei},
  title = {Characteristics of Separations in Fracture After Crack Tip Opening Displacement Tests of Low-Carbon Microalloyed Offshore Steel S460MLO},
  journal = {Alloys},
  year = {2025},
  volume = {4},
  number = {2},
  pages = {6},
  doi = {10.3390/alloys4020006}
}
Kostenlos starten →