EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Annealing Temperature on Microstructure and Properties of Solid Solution Extruded Mg–2.0Zn–1.0Y–0.5Zr Alloys

Junguang He, Zhenfei Cheng, Jiuba Wen, Peiwu Tian, Wuyun Feng, Xiangyang Zheng, Yuan Gong

Alloys · 23.05.2024 · 3 (2) · 140-160

DOI: 10.3390/alloys3020008 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Alloys, online erschienen am 23.05.2024. Verfasst von Junguang He und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henan New Nonferrous Metal Materials University Science and Technology Innovation Team Support Program of China, Henan Provincial Natural Science Foundation, Henan Key Laboratory of Non-ferrous Materials Science and Processing Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this investigation, the effects of different annealing temperatures (180, 200, 220, 240, 260, and 280 °C) on the microstructure evolution and properties of an extruded Mg–2.0Zn–1.0Y–0.5Zr (wt%) magnesium alloys were determined. Optical microscopy (OM), scanning electron microscopy (SEM), immersion corrosion, electrochemical corrosion experiments, and tensile testing were performed. Research has found that combining hot extrusion with subsequent low-temperature annealing significantly improves the strength, plasticity, and corrosion resistance of alloys due to grain refinement and a reduced dislocation density. The alloy was completely recrystallized at an annealing temperature of 240 °C for 4 h after solid solution extrusion, and the grains were fine and uniform, demonstrating the best comprehensive properties. Its corrosion rate, ultimate tensile strength, yield strength, and elongation were 0.454 ± 0.023 mm/y, 346.7 ± 8.9 MPa, 292.4 ± 6.9 MPa, and 19.0 ± 0.4%, respectively. The corrosion mechanism of the specimens under extruded and annealed conditions was analyzed. After annealing at 240 °C for 4 h, the dislocation and bimodal grain structure of the samples were almost eliminated, resulting in uniform and fine grains, which were conducive to the formation of a more uniform and denser oxide film, thus improving the corrosion resistance of the alloy.

Förderung

  • Henan New Nonferrous Metal Materials University Science and Technology Innovation Team Support Program of China
  • Henan Provincial Natural Science Foundation
  • Henan Key Laboratory of Non-ferrous Materials Science and Processing Technology

Zitieren

APA

He, J., Cheng, Z., Wen, J., Tian, P., Feng, W., Zheng, X., & Gong, Y. (2024). Effect of Annealing Temperature on Microstructure and Properties of Solid Solution Extruded Mg–2.0Zn–1.0Y–0.5Zr Alloys. Alloys, 3(2), 140-160. https://doi.org/10.3390/alloys3020008

Vancouver

He J, Cheng Z, Wen J, Tian P, Feng W, Zheng X, et al. Effect of Annealing Temperature on Microstructure and Properties of Solid Solution Extruded Mg–2.0Zn–1.0Y–0.5Zr Alloys. Alloys. 2024;3(2):140-160. doi:10.3390/alloys3020008

BibTeX
@article{He2024,
  author = {He, Junguang and Cheng, Zhenfei and Wen, Jiuba and Tian, Peiwu and Feng, Wuyun and Zheng, Xiangyang and Gong, Yuan},
  title = {Effect of Annealing Temperature on Microstructure and Properties of Solid Solution Extruded Mg–2.0Zn–1.0Y–0.5Zr Alloys},
  journal = {Alloys},
  year = {2024},
  volume = {3},
  number = {2},
  pages = {140--160},
  doi = {10.3390/alloys3020008}
}
Kostenlos starten →