EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sensor-Based Monitoring and Control of Precision Seed Metering Systems in Digital Agriculture

Arnab Majumder, Md Nasim Reza, Ka Young Lee, Md Mamunur Rashid, Yong Il Mun, Dae-Hyun Lee, Sun-Ok Chung

Agronomy · 27.10.2026 · 16 (21) · 2112

DOI: 10.3390/agronomy16212112 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Agronomy, online erschienen am 27.10.2026. Verfasst von Arnab Majumder und 6 weiteren Autor:innen. Die Arbeit nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Planning and Evaluation for Technology in Food, Agriculture and Forestry, Ministry of Agriculture, Food and Rural Affairs.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Precision seed metering has evolved from mechanically optimized devices to sensor-based, digitally connected systems. However, research remains fragmented across metering mechanisms, sensing, data processing, communication, and control. This review examined monitoring and closed-loop control throughout the seed-delivery process, from pickup and release to tube passage, furrow placement, and crop emergence. This structured review synthesized 49 primary studies identified through Scopus and the Web of Science Core Collection, with supplementary searching using Google Scholar and literature coverage through 1 September 2026. Optical and photoelectric sensors provide the most direct evidence for seed-passage detection, whereas encoders, pressure, vacuum, motor-current, and vibration measurements primarily indicate machine or actuator conditions. Machine vision provides spatial information and can support independent reference measurements, but requires suitable imaging conditions and computational resources. Capacitive, acoustic, impact-based, and hybrid approaches remain less extensively validated. Reported performance cannot be directly compared across studies due to differences in seed characteristics, mechanisms, operating speeds, event definitions, disturbances, and reference methods. Most studies demonstrate monitoring, alarms, or open-loop optimization rather than complete sensor-to-actuator correction. An engineering framework is therefore proposed to connect measurement targets, evidence maturity, latency, actuator authority, and independent verification. Future research should prioritize standardized testing, disturbance robustness, synchronized multi-row field validation, and measured end-to-end delay. Transparent reporting of correction accuracy, stability, cost, power demand, and interoperability is also required to support deployment and defensible assessment of closed-loop seeding systems.

Förderung

  • Korea Institute of Planning and Evaluation for Technology in Food, Agriculture and Forestry
  • Ministry of Agriculture, Food and Rural Affairs

Zitieren

APA

Majumder, A., Reza, M. N., Lee, K. Y., Rashid, M. M., Mun, Y. I., Lee, D., & Chung, S. (2026). Sensor-Based Monitoring and Control of Precision Seed Metering Systems in Digital Agriculture. Agronomy, 16(21), 2112. https://doi.org/10.3390/agronomy16212112

Vancouver

Majumder A, Reza MN, Lee KY, Rashid MM, Mun YI, Lee D, et al. Sensor-Based Monitoring and Control of Precision Seed Metering Systems in Digital Agriculture. Agronomy. 2026;16(21):2112. doi:10.3390/agronomy16212112

BibTeX
@article{Majumder2026,
  author = {Majumder, Arnab and Reza, Md Nasim and Lee, Ka Young and Rashid, Md Mamunur and Mun, Yong Il and Lee, Dae-Hyun and Chung, Sun-Ok},
  title = {Sensor-Based Monitoring and Control of Precision Seed Metering Systems in Digital Agriculture},
  journal = {Agronomy},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {2112},
  doi = {10.3390/agronomy16212112}
}
Kostenlos starten →