EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Experimental Validation of a Weeding Device Integrating Weed Stem Damage and Targeted Herbicide Application

He Li, Chenxu Li, Jiajun Chai, Lele Wang, Zishang Yang, Yechao Yuan, Shangshang Cheng

Agronomy · 07.01.2026 · 16 (2) · 151

DOI: 10.3390/agronomy16020151 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Agronomy, online erschienen am 07.01.2026. Verfasst von He Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Modern Agricultural Industrial Technology System Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In view of the problems of high weed regeneration rate in traditional mechanical weeding and environmental risk in chemical weeding, a synergetic strategy of “mechanical damage + wound spraying mechanism” was proposed, and an intelligent weeding device combining synchronous cutting and spraying was designed to enhance the efficacy of herbicides and reduce their use. Focusing on the physical characteristics of weeds and the cutting mechanism, the analysis of the weed-cutting system and the force characteristics of the cutting tool were conducted. Key factors affecting cutting quality were identified, and their respective value ranges were determined. A targeted spraying system was developed, featuring a conical nozzle, DC diaphragm pump, and electromagnetic control valve. The Delta parallel manipulator, equipped with both the cutting tool and nozzle, was designed, and a kinematic model was established for both its forward and inverse movements. Genetic algorithms were applied to optimize structural parameters, aiming to ensure effective coverage of typical weed distribution areas within the working space. A simulated environment measurement was built to verify the motion accuracy of the manipulator. Field experiments demonstrated that the equipment achieved an 81.5% wound weeding rate on malignant weeds in the seedling stage at an operating speed of 0.6 m/s, with a seedling injury rate below 5%. These results validate the high efficiency of the integrated mechanical cutting and targeted spraying system, offering a reliable technical solution for green and intelligent weed control in agriculture. This study fills the blank of only focusing on recognition accuracy or weeding rate under a single weeding method, but lacks a cooperative weeding operation.

Förderung

  • the National Modern Agricultural Industrial Technology System Project

Zitieren

APA

Li, H., Li, C., Chai, J., Wang, L., Yang, Z., Yuan, Y., & Cheng, S. (2026). Design and Experimental Validation of a Weeding Device Integrating Weed Stem Damage and Targeted Herbicide Application. Agronomy, 16(2), 151. https://doi.org/10.3390/agronomy16020151

Vancouver

Li H, Li C, Chai J, Wang L, Yang Z, Yuan Y, et al. Design and Experimental Validation of a Weeding Device Integrating Weed Stem Damage and Targeted Herbicide Application. Agronomy. 2026;16(2):151. doi:10.3390/agronomy16020151

BibTeX
@article{Li2026,
  author = {Li, He and Li, Chenxu and Chai, Jiajun and Wang, Lele and Yang, Zishang and Yuan, Yechao and Cheng, Shangshang},
  title = {Design and Experimental Validation of a Weeding Device Integrating Weed Stem Damage and Targeted Herbicide Application},
  journal = {Agronomy},
  year = {2026},
  volume = {16},
  number = {2},
  pages = {151},
  doi = {10.3390/agronomy16020151}
}
Kostenlos starten →