EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of the Resistance to Teeth During the Picking Process Based on DEM-MBD Coupling Simulation

Weiquan Fang, Xinzhong Wang, Dianlei Han, Israel Enema Ohiemi

Agronomy · 22.04.2025 · 15 (5) · 1002

DOI: 10.3390/agronomy15051002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Agronomy, online erschienen am 22.04.2025. Verfasst von Weiquan Fang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, Ministry of Industry and Information Technology’s Residual Film Recycling Machine Project, Priority Academic Program Development of Jiangsu Higher Education Institutions.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve the film-picking performance of toothed chain tillage residual film recycling machines, the working parameters of a film-picking device were optimized using a Box–Behnken design, with the film-picking rate as the response parameter. The effectiveness of the film-picking device, along with soil compaction, torque, and stress on the picking teeth during the process, was evaluated through DEM-MBD coupling simulations and experiments. The optimized working parameters for the film-lifting device were found to be forward speed v=1.94 m·s−1, picking tooth speed n=10.47 rad·s−1, and penetration depth h=125 mm. Under these conditions, the film-picking rate for the single-tooth and multi-tooth devices were 88% and 90%, respectively, with a 2% error. The simulation and experimental values for soil compaction, torque, and stress during the film-picking process were 800 Pa, 2.72 N·m, and 6.4 N, respectively. The corresponding simulation values were 870 Pa, 2.53 N·m, and 6.5 N, with errors of 8%, 7%, and 2%. This study provides valuable insights for optimizing the design of residual film recycling machines and predicting soil compaction, tooth torque, and stress.

Förderung

  • National Key R&D Program of China
  • Ministry of Industry and Information Technology’s Residual Film Recycling Machine Project
  • Priority Academic Program Development of Jiangsu Higher Education Institutions
  • 2023 Open Project of Key Laboratory of Modern Agricultural Equipment and Technology (Jiangsu University)
  • Ministry of Education and High-tech Key Laboratory of Agricultural Equipment and Intelligence of Jiangsu Province

Zitieren

APA

Fang, W., Wang, X., Han, D., & Ohiemi, I. E. (2025). Analysis of the Resistance to Teeth During the Picking Process Based on DEM-MBD Coupling Simulation. Agronomy, 15(5), 1002. https://doi.org/10.3390/agronomy15051002

Vancouver

Fang W, Wang X, Han D, Ohiemi IE. Analysis of the Resistance to Teeth During the Picking Process Based on DEM-MBD Coupling Simulation. Agronomy. 2025;15(5):1002. doi:10.3390/agronomy15051002

BibTeX
@article{Fang2025,
  author = {Fang, Weiquan and Wang, Xinzhong and Han, Dianlei and Ohiemi, Israel Enema},
  title = {Analysis of the Resistance to Teeth During the Picking Process Based on DEM-MBD Coupling Simulation},
  journal = {Agronomy},
  year = {2025},
  volume = {15},
  number = {5},
  pages = {1002},
  doi = {10.3390/agronomy15051002}
}
Kostenlos starten →