Design and Testing of Film Picking–Unloading Device of Tillage Residual Film Recycling Machine Based on DEM Parameter Calibration
Agronomy · 14.04.2025 · 15 (4) · 955
DOI: 10.3390/agronomy15040955 ↗Kurz gefasst
Fachartikel in der Zeitschrift Agronomy, online erschienen am 14.04.2025. Verfasst von Weiquan Fang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, Ministry of Industry and Information Technology’s Residual Film Recycling Machine Project, Priority Academic Program Development of Jiangsu Higher Education Institutions.
Abstract (Originalsprache)
The operating parameters and operating effect of a residual film recycling device can be predicted, and the key parameters can be determined based on the DEM–MBD coupling simulation. The parameters obtained from the parameter calibration are the basis of the simulation. This study calibrates DEM parameters for the soil-touching components of a tillage residual film recycling machine. A film-picking model for elastic tooth–soil–residual film interactions was established. The reliability of the contact parameters was verified by comparing the simulation and experimental angle of repose for soil–soil (43.6° vs. 42.42°, error was 2.7%) and residual film–residual film (43° vs. 43.7°, error was 1.6%) using the funnel and bucket methods. A DEM model for film–soil detachment was developed, with a force analysis showing an 8.1% error between the simulation (0.34 N) and experiment (0.37 N). Additionally, a DEM–MBD coupling model was used to analyze the recovery rate of residual film under elastic teeth, yielding a 2% error between simulation (90%) and experiment (92%). This study provides a basis for DEM parameter optimization in soil-touching components.
Förderung
- National Key R&D Program of China
- Ministry of Industry and Information Technology’s Residual Film Recycling Machine Project
- Priority Academic Program Development of Jiangsu Higher Education Institutions
- 2023 Open Project of Key Laboratory of Modern Agricultural Equipment and Technology (Jiangsu University)
Zitieren
APA
Fang, W., Wang, X., Han, D., & Ohiemi, I. E. (2025). Design and Testing of Film Picking–Unloading Device of Tillage Residual Film Recycling Machine Based on DEM Parameter Calibration. Agronomy, 15(4), 955. https://doi.org/10.3390/agronomy15040955
Vancouver
Fang W, Wang X, Han D, Ohiemi IE. Design and Testing of Film Picking–Unloading Device of Tillage Residual Film Recycling Machine Based on DEM Parameter Calibration. Agronomy. 2025;15(4):955. doi:10.3390/agronomy15040955
BibTeX
@article{Fang2025,
author = {Fang, Weiquan and Wang, Xinzhong and Han, Dianlei and Ohiemi, Israel Enema},
title = {Design and Testing of Film Picking–Unloading Device of Tillage Residual Film Recycling Machine Based on DEM Parameter Calibration},
journal = {Agronomy},
year = {2025},
volume = {15},
number = {4},
pages = {955},
doi = {10.3390/agronomy15040955}
}
EUVIMED