Kinematic and Dynamic Analysis of a Crank–Rocker Mechanism with Flexible Tension Members for the Cutter Bar of a Front-Mounted Forage Header
AgriEngineering · 19.11.2026 · 8 (11) · 501
DOI: 10.3390/agriengineering8110501 ↗Kurz gefasst
Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 19.11.2026. Verfasst von Anuarbek Adilsheyev und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Industry and Construction of the Republic of Kazakhstan.
Abstract (Originalsprache)
Front-mounted forage headers are used in forage-harvesting systems where compact machine layouts and controllable cutter-bar dynamics are important. This study investigates a crank–rocker mechanism with a pretensioned closed loop of flexible tension members to drive a single reciprocating knife alternately from both ends. Kinematic and dynamic behavior was analyzed by Lagrangian mechanics and harmonic balance; flexible-member stiffness and drive power were examined experimentally. In the investigated calculations, the knife stroke increased by 3.44 mm, peak speed by 4.1%, and peak acceleration by 4.57% relative to the unilateral configuration. Laboratory no-load knife-drive measurements indicated a 5–7% decrease in power. Under the reported field conditions, total power measured for the combined header working units (cutter bar, reel, and auger) was 11.6 versus 10.2 kW during alfalfa mowing and 15.7 versus 13.4 kW for mixed herbage, comparing unilateral and bilateral knife-drive configurations, respectively. These differences are system-level observations; they do not establish the isolated field power saving attributable to the knife drive. The findings demonstrate feasibility under the tested conditions, while replicated validation, uncertainty analysis, and long-duration fatigue tests remain necessary.
Förderung
- Ministry of Industry and Construction of the Republic of Kazakhstan
Zitieren
APA
Adilsheyev, A., Zhumagulov, Z., Kassimova, R., & Karmanov, D. (2026). Kinematic and Dynamic Analysis of a Crank–Rocker Mechanism with Flexible Tension Members for the Cutter Bar of a Front-Mounted Forage Header. AgriEngineering, 8(11), 501. https://doi.org/10.3390/agriengineering8110501
Vancouver
Adilsheyev A, Zhumagulov Z, Kassimova R, Karmanov D. Kinematic and Dynamic Analysis of a Crank–Rocker Mechanism with Flexible Tension Members for the Cutter Bar of a Front-Mounted Forage Header. AgriEngineering. 2026;8(11):501. doi:10.3390/agriengineering8110501
BibTeX
@article{Adilsheyev2026,
author = {Adilsheyev, Anuarbek and Zhumagulov, Zhandos and Kassimova, Rezvangul and Karmanov, Darkhan},
title = {Kinematic and Dynamic Analysis of a Crank–Rocker Mechanism with Flexible Tension Members for the Cutter Bar of a Front-Mounted Forage Header},
journal = {AgriEngineering},
year = {2026},
volume = {8},
number = {11},
pages = {501},
doi = {10.3390/agriengineering8110501}
}
EUVIMED