Moisture-Dependent Airflow Resistance and Predictive Modeling of Bulk Camelina Seeds for Drying and Aeration Design
AgriEngineering · 12.11.2026 · 8 (11) · 486
DOI: 10.3390/agriengineering8110486 ↗Kurz gefasst
Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 12.11.2026. Verfasst von Wilber Akatuhurira und 2 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Agriculture, National Institute of Food and Agriculture.
Abstract (Originalsprache)
Reliable airflow-resistance data are essential for designing efficient drying, aeration, and storage systems for bulk seeds. However, airflow resistance of camelina remains largely unknown despite its growing importance as an oilseed crop for biofuel production. This study evaluated the effects of airflow rate, bed depth, filling method, and moisture content on pressure drop through bulk camelina seeds and assessed established airflow-resistance models. Seeds were conditioned to 6, 8, 11, and 14% moisture content (w.b.) and tested at airflow rates of 0.02–0.50 m3 s−1 m−2 across five bed depths under loose- and dense-fill conditions. Ergun, Hukill and Ives, and Shedd models were applied to the experimental data. Results indicated that pressure drop increased significantly (p < 0.05) with airflow rate and bed depth, was greater under dense-fill conditions, and decreased with increasing moisture content. All models adequately described the experimental data (R2 = 0.981–0.989), with the Shedd model providing the best overall performance. A moisture-dependent modified Shedd model was developed to incorporate moisture effects and described the observed pressure-drop trends (R2 = 0.975; RMSE = 54.87 Pa m−1). This model was calibrated and evaluated using the same experimental dataset and has not yet been validated with independent data. The results provide crop-specific parameters for predicting airflow resistance and support fan sizing, energy-efficient aeration, and drying-system design for camelina seeds.
Förderung
- U.S. Department of Agriculture, National Institute of Food and Agriculture
Zitieren
APA
Akatuhurira, W., Clementson, C. L., & Hellevang, K. (2026). Moisture-Dependent Airflow Resistance and Predictive Modeling of Bulk Camelina Seeds for Drying and Aeration Design. AgriEngineering, 8(11), 486. https://doi.org/10.3390/agriengineering8110486
Vancouver
Akatuhurira W, Clementson CL, Hellevang K. Moisture-Dependent Airflow Resistance and Predictive Modeling of Bulk Camelina Seeds for Drying and Aeration Design. AgriEngineering. 2026;8(11):486. doi:10.3390/agriengineering8110486
BibTeX
@article{Akatuhurira2026,
author = {Akatuhurira, Wilber and Clementson, Clairmont L. and Hellevang, Kenneth},
title = {Moisture-Dependent Airflow Resistance and Predictive Modeling of Bulk Camelina Seeds for Drying and Aeration Design},
journal = {AgriEngineering},
year = {2026},
volume = {8},
number = {11},
pages = {486},
doi = {10.3390/agriengineering8110486}
}
EUVIMED