EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Investigation of a Sweep Coulter with a Semi-Ellipsoidal Scatterer for Lateral Distribution of Wheat Seeds

Nurbol Kakabayev, Maxat Amantayev, Kahim Mambetalin, Talgat Zhunusov, Vladimir Odintsov, Saule Uzbergenova, Yevgeniy Zolotukhin, Kuat Ibraimov, Maulen Ayazbay

AgriEngineering · 25.10.2026 · 8 (11) · 457

DOI: 10.3390/agriengineering8110457 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 25.10.2026. Verfasst von Nurbol Kakabayev und 8 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Republic of Kazakhstan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Achieving uniform lateral seed distribution across the working width of a sweep coulter remains a challenge in intrasoil-broadcast sowing. This study presents a sweep coulter equipped with a stationary semi-ellipsoidal seed scatterer with two symmetrical radial through-slots. The research combined theoretical analysis of seed motion, Discrete element method (DEM) simulations, laboratory experiments, and statistical analysis. The theoretical model described the dependence of lateral seed-flight distance on the scatterer geometry and impact conditions. DEM simulations provided qualitative mechanistic evidence, supplemented by descriptive quantitative results, of lateral flow division and ballistic seed motion after impact. A three-factor, three-level full factorial design 33 comprising 27 experimental runs was used to investigate the effects of scatterer base diameter (d), mounting height (h), and scatterer height (H) on the coefficients of variation in lateral seed distribution and total seeding. Based primarily on the Y1 response surface, the parameter ranges d = 39–41 mm, h = 17–19 mm, and H = 19–21 mm were selected as a compromise range within the investigated design space. Y2 was considered only descriptively because its quadratic model was not statistically significant. The theoretical model indicated a range-maximizing rebound angle of approximately 22.6–23.2° under the investigated conditions. ANOVA showed that the Y1 model was significant (F(9,17) = 50.571, p < 0.001), with base diameter having the strongest linear effect. The Y2 model was not significant (F(9,17) = 1.867, p = 0.128) and was interpreted descriptively. The results show the effects of the scatterer geometric parameters within the investigated design space and provide a basis for further experimental evaluation of the proposed coulter design.

Förderung

  • Ministry of Science and Higher Education of the Republic of Kazakhstan

Zitieren

APA

Kakabayev, N., Amantayev, M., Mambetalin, K., Zhunusov, T., Odintsov, V., Uzbergenova, S., Zolotukhin, Y., Ibraimov, K., & Ayazbay, M. (2026). Design and Investigation of a Sweep Coulter with a Semi-Ellipsoidal Scatterer for Lateral Distribution of Wheat Seeds. AgriEngineering, 8(11), 457. https://doi.org/10.3390/agriengineering8110457

Vancouver

Kakabayev N, Amantayev M, Mambetalin K, Zhunusov T, Odintsov V, Uzbergenova S, et al. Design and Investigation of a Sweep Coulter with a Semi-Ellipsoidal Scatterer for Lateral Distribution of Wheat Seeds. AgriEngineering. 2026;8(11):457. doi:10.3390/agriengineering8110457

BibTeX
@article{Kakabayev2026,
  author = {Kakabayev, Nurbol and Amantayev, Maxat and Mambetalin, Kahim and Zhunusov, Talgat and Odintsov, Vladimir and Uzbergenova, Saule and Zolotukhin, Yevgeniy and Ibraimov, Kuat and Ayazbay, Maulen},
  title = {Design and Investigation of a Sweep Coulter with a Semi-Ellipsoidal Scatterer for Lateral Distribution of Wheat Seeds},
  journal = {AgriEngineering},
  year = {2026},
  volume = {8},
  number = {11},
  pages = {457},
  doi = {10.3390/agriengineering8110457}
}
Kostenlos starten →