EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Predicting Tomato Bioyield Force Using Compression Stiffness and Complementary Fruit Properties for Robotic Grip Force Planning

Giryeon Kim, Kenichi Tokuda, Ryo Arai, Wataru Iijima

AgriEngineering · 23.10.2026 · 8 (11) · 455

DOI: 10.3390/agriengineering8110455 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 23.10.2026. Verfasst von Giryeon Kim und 3 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agriculture, Forestry and Fisheries Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fruit-specific estimates of failure-related force could support grip force planning in tomato harvesting robots. This study evaluated whether the apparent compression stiffness obtained during pre-bioyield low-load compression can predict the individual mechanical bioyield force. The prediction was assessed through post-test evaluation using the complete compression record and through sequential replay with prediction-based stopping. The contribution of complementary fruit properties, including fruit weight, equivalent diameter, and Jeffreys model viscoelastic parameters, was also evaluated relative to the use of stiffness alone. The main analysis included 87 of the 103 tested “Tarffy 17” tomatoes. Stiffness was calculated across 30 absolute-force intervals and evaluated using leave-one-out cross-validation. In the post-test, the lowest mean absolute error (MAE), 9.6 N, was obtained for [0,30) N. In the sequential replay, the lowest MAE, 10.2 N, was obtained for [5,35) N, whereas using the [0,30) N interval increased the MAE to 35.9 N. In the post-test LOOCV, adding fruit weight, equivalent diameter, or Jeffreys model viscoelastic parameters resulted in only minor changes in MAE, with no significant differences in paired errors. These results show that low-load stiffness alone provided fruit-specific information for predicting mechanical bioyield force under the present conditions and that the stiffness calculation interval and prediction timing should be considered jointly for sequential use.

Förderung

  • Agriculture, Forestry and Fisheries Research Council

Zitieren

APA

Kim, G., Tokuda, K., Arai, R., & Iijima, W. (2026). Predicting Tomato Bioyield Force Using Compression Stiffness and Complementary Fruit Properties for Robotic Grip Force Planning. AgriEngineering, 8(11), 455. https://doi.org/10.3390/agriengineering8110455

Vancouver

Kim G, Tokuda K, Arai R, Iijima W. Predicting Tomato Bioyield Force Using Compression Stiffness and Complementary Fruit Properties for Robotic Grip Force Planning. AgriEngineering. 2026;8(11):455. doi:10.3390/agriengineering8110455

BibTeX
@article{Kim2026,
  author = {Kim, Giryeon and Tokuda, Kenichi and Arai, Ryo and Iijima, Wataru},
  title = {Predicting Tomato Bioyield Force Using Compression Stiffness and Complementary Fruit Properties for Robotic Grip Force Planning},
  journal = {AgriEngineering},
  year = {2026},
  volume = {8},
  number = {11},
  pages = {455},
  doi = {10.3390/agriengineering8110455}
}
Kostenlos starten →