Integrated Electromechanical Modeling and Dynamic Analysis of a Planetary-Driven Seed-Removing Device for Cotton Gins
AgriEngineering · 19.09.2026 · 8 (9) · 393
DOI: 10.3390/agriengineering8090393 ↗Kurz gefasst
Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 19.09.2026. Verfasst von Davlat Mukhammadiev und 7 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institute of Mechanics and Seismic Stability of Structures named after M.T. Urazbaev, Uzbekistan Academy of Sciences.
Abstract (Originalsprache)
This study develops an integrated electromechanical model of a seed-removing device used in a saw-type cotton gin. The modeled machine unit comprises a squirrel-cage induction motor, an elastic-dissipative belt transmission, a seed-removing tube rigidly connected to a ring gear, planet gears mounted on a fixed carrier, and an auger rigidly connected to the sun gear. The equations of motion were derived using Lagrange’s equations of the second kind. The induction motor was represented by the dynamic characteristic proposed by A.E. Levin, which was selected as a reduced-order model that captures the transient electromagnetic torque response during start-up without requiring the additional electrical parameters of a full direct–quadrature (d–q) axis model, while providing a more realistic transient representation than a static torque–speed characteristic. The moments of inertia of the rotating components were identified experimentally by the acceleration method, and the resulting nonlinear ordinary differential equations were solved by a fourth-order Runge-Kutta scheme. The model reproduces the start-up, transient, and steady-state stages and enables the evaluation of angular velocities, torques, angular accelerations, power demand, and rotational irregularity. Experimental validation was performed for the steady-state rotational speeds of the seed-removing tube and auger and for motor power, whereas the reported transient peak torque and angular acceleration were obtained from the numerical simulation. For the 3 kW, 735 rpm induction motor, the rated torque was 38.98 N·m, whereas the calculated peak starting torque reached 101.63 N·m, corresponding to a starting-torque ratio of 2.61. The transient process lasted approximately 3.5 s, and the maximum motor angular acceleration reached 2988.6 rad/s2 at t = 2.25 s. Within the investigated parameter ranges, the OFAT sensitivity analysis showed that the resistance moment of the seed-removing tube and the inertia of the auger exert the strongest influence on rotational irregularity, whereas the inertia and resistance of the planet gears have a comparatively weak effect. A reduction in the effective torsional stiffness of the belt drive from 17.2 to approximately 10.3 N·m/rad reduced the start-up rotational irregularity of the auger, evaluated over t = 2–4 s, from 0.435 to 0.420 and decreased motor power consumption from about 2.55 to 2.50 kW. The proposed model provides a system-level framework for selecting drive parameters and limiting torsional oscillations in planetary-driven cotton-processing machinery.
Förderung
- Institute of Mechanics and Seismic Stability of Structures named after M.T. Urazbaev, Uzbekistan Academy of Sciences
Zitieren
APA
Mukhammadiev, D., Akhmedov, K., Ibragimov, F., Zhamolova, L., Abzoirov, O., Primov, B., Ergashev, I., & Mallaev, O. (2026). Integrated Electromechanical Modeling and Dynamic Analysis of a Planetary-Driven Seed-Removing Device for Cotton Gins. AgriEngineering, 8(9), 393. https://doi.org/10.3390/agriengineering8090393
Vancouver
Mukhammadiev D, Akhmedov K, Ibragimov F, Zhamolova L, Abzoirov O, Primov B, et al. Integrated Electromechanical Modeling and Dynamic Analysis of a Planetary-Driven Seed-Removing Device for Cotton Gins. AgriEngineering. 2026;8(9):393. doi:10.3390/agriengineering8090393
BibTeX
@article{Mukhammadiev2026,
author = {Mukhammadiev, Davlat and Akhmedov, Khamidulla and Ibragimov, Farkhod and Zhamolova, Lola and Abzoirov, Ortiq and Primov, Baxrom and Ergashev, Ilhom and Mallaev, Orifjon},
title = {Integrated Electromechanical Modeling and Dynamic Analysis of a Planetary-Driven Seed-Removing Device for Cotton Gins},
journal = {AgriEngineering},
year = {2026},
volume = {8},
number = {9},
pages = {393},
doi = {10.3390/agriengineering8090393}
}
EUVIMED