EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanized Ground Roughness Mapping by Remotely Piloted Aircraft

Lucas Gabryel Maciel dos Santos, Lucas Santos Santana, Marcos David dos Santos Lopes, Josiane Maria da Silva, Carmem Lúcia da Silva Surmani, Celine Russo, Daniele Sarri, Giuseppe Rossi, Andrea Pagliai

AgriEngineering · 23.06.2026 · 8 (7) · 256

DOI: 10.3390/agriengineering8070256 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 23.06.2026. Verfasst von Lucas Gabryel Maciel dos Santos und 8 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Digital Elevation Models (DEMs) provide essential information for decision-making in precision agriculture. This study evaluated the altimetric quality of DEMs generated by Remotely Piloted Aircraft (RPA) platforms, the influence of flight direction, and the effect of mechanically disturbed soil surface conditions. We obtained data from a 900 m2 area. Flights were conducted under pre- and post-mechanization conditions using a reversible plow, with flights in both longitudinal and transverse directions. We processed images using Structure-from-Motion (SfM) techniques to generate dense point clouds and DEMs. Statistical analyses relied on raster statistics and elevation cross-section transects of microtopography, were evaluated via descriptive statistics, ANOVA, Tukey’s HSD tests, and spatialization with micro-variation classification. Significant differences emerged among the evaluated models (p < 0.001), with Phantom-derived DEMs showing systematically higher elevations than Mavic models (617.31 ± 0.16 m vs. 605.41 ± 0.23 m, respectively). Post-plowing longitudinal flights showed the least variation, indicating greater altimetric consistency after secondary soil preparation. Conversely, the pre-plowing transverse flight (Mavic Flight 2) produced the largest errors. Quantitative assessment of topographic profiles revealed high morphological correspondence between platforms, with Pearson correlation coefficients ranging from 0.84 to 0.96 after vertical normalization, confirming that terrain morphology was preserved despite systematic vertical offsets. The effect of flight direction was more pronounced before soil preparation; after harrowing (a homogeneous surface), the difference between directions decreased, but longitudinal flights maintained an advantage, while transverse flights (especially Mavic) tended to overestimate elevations spatially.

Zitieren

APA

Santos, L. G. M. D., Santana, L. S., Lopes, M. D. D. S., Silva, J. M. D., Surmani, C. L. D. S., Russo, C., Sarri, D., Rossi, G., & Pagliai, A. (2026). Mechanized Ground Roughness Mapping by Remotely Piloted Aircraft. AgriEngineering, 8(7), 256. https://doi.org/10.3390/agriengineering8070256

Vancouver

Santos LGMD, Santana LS, Lopes MDDS, Silva JMD, Surmani CLDS, Russo C, et al. Mechanized Ground Roughness Mapping by Remotely Piloted Aircraft. AgriEngineering. 2026;8(7):256. doi:10.3390/agriengineering8070256

BibTeX
@article{Santos2026,
  author = {Santos, Lucas Gabryel Maciel dos and Santana, Lucas Santos and Lopes, Marcos David dos Santos and Silva, Josiane Maria da and Surmani, Carmem Lúcia da Silva and Russo, Celine and Sarri, Daniele and Rossi, Giuseppe and Pagliai, Andrea},
  title = {Mechanized Ground Roughness Mapping by Remotely Piloted Aircraft},
  journal = {AgriEngineering},
  year = {2026},
  volume = {8},
  number = {7},
  pages = {256},
  doi = {10.3390/agriengineering8070256}
}
Kostenlos starten →