EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Development of a Lightweight Foldable Robotic Arm with Straight-Line Motion for UAV Manipulation

Kyler C. Bingham, Taher Deemyad

AgriEngineering · 08.06.2026 · 8 (6) · 233

DOI: 10.3390/agriengineering8060233 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 08.06.2026. Verfasst von Kyler C. Bingham und 1 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Idaho State University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Unmanned aerial vehicles (UAVs) are widely used for monitoring and payload transport; however, their application in autonomous physical interaction remains limited due to payload constraints, stability challenges, and the complexity of integrating manipulation systems. This study presents the design and development of a lightweight foldable robotic arm based on the ten-bar Kempe Kite Inversor II linkage for UAV aerial manipulation. The mechanism generates precise straight-line motion using a single degree of freedom. Kinematic modeling and simulation validated a maximum end-effector reach of approximately 0.42 m. Structural optimization using additive manufacturing and honeycomb cellular architectures significantly reduced system weight while maintaining mechanical reliability. A passive compliant gripper, counterbalance mechanism, onboard storage net, and landing gear were integrated to evaluate the arm in a practical harvesting scenario using cherries as the test object. The final integrated system weighs 0.351 kg during operation, remaining approximately 16% below the experimentally determined UAV payload limit of 0.4185 kg. Proof-of-concept flight demonstrations confirmed successful aerial grasping of cherries, validating the feasibility of the proposed lightweight manipulation approach for agricultural applications.

Förderung

  • Idaho State University

Zitieren

APA

Bingham, K. C., & Deemyad, T. (2026). Design and Development of a Lightweight Foldable Robotic Arm with Straight-Line Motion for UAV Manipulation. AgriEngineering, 8(6), 233. https://doi.org/10.3390/agriengineering8060233

Vancouver

Bingham KC, Deemyad T. Design and Development of a Lightweight Foldable Robotic Arm with Straight-Line Motion for UAV Manipulation. AgriEngineering. 2026;8(6):233. doi:10.3390/agriengineering8060233

BibTeX
@article{Bingham2026,
  author = {Bingham, Kyler C. and Deemyad, Taher},
  title = {Design and Development of a Lightweight Foldable Robotic Arm with Straight-Line Motion for UAV Manipulation},
  journal = {AgriEngineering},
  year = {2026},
  volume = {8},
  number = {6},
  pages = {233},
  doi = {10.3390/agriengineering8060233}
}
Kostenlos starten →