EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of an Automatic Aquaculture Bottom Feeder Using a Closed-Type Impeller

Jose Pocholo I. Dorongon, Omar F. Zubia, Paolo Rommel P. Sanchez, Ralph Kristoffer B. Gallegos, Adrian A. Borja

AgriEngineering · 28.05.2026 · 8 (6) · 210

DOI: 10.3390/agriengineering8060210 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 28.05.2026. Verfasst von Jose Pocholo I. Dorongon und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Department of Agriculture, Engr. Elizabeth Maghirang, University of the Philippines Los Baños.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient feed management is essential in aquaculture, especially for bottom-feeding species such as shrimp that require feed delivery at the tank bottom. Most commercial automated feeders are designed for surface-feeding fish and are unsuitable for benthic organisms, leading to feed waste and uneven distribution. This study developed and evaluated an automatic bottom feeder capable of dispensing sinking pellets directly to the substrate. The system integrated a 3D-printed auger for precise feed metering and a closed-type centrifugal impeller positioned at the water surface to achieve radial dispersion of feed. An Arduino Uno microcontroller operated the impeller speed (285.98–586.85 rpm), feed mass (95.23–285.68 g), and dispersion time (2–8 s). A Box–Behnken response surface methodology was used to analyze the influence of these parameters on the mean radius spread of feed, supported by image-based uniformity assessment using OpenCV. Results identified impeller speed as the most significant factor (p = 0.010), with optimal dispersion observed at moderate speeds and longer spread durations. The system demonstrated reliable mechanical performance and precise control, providing a novel, programmable solution for uniform feed delivery in shrimp aquaculture and a promising foundation for scalable, automated bottom-feeding technologies.

Förderung

  • The Department of Agriculture
  • Engr. Elizabeth Maghirang
  • University of the Philippines Los Baños
  • Office of the Vice Chancellor for Student Affairs
  • Agricultural and Rural Development Scholarship (ARDS)—Accelerating Growth
  • Engineering Research and Development for Technology (ERDT) Scholarship Program of the Department of Science and Technology–Science Education Institute (DOST-SE…

Zitieren

APA

Dorongon, J. P. I., Zubia, O. F., Sanchez, P. R. P., Gallegos, R. K. B., & Borja, A. A. (2026). Development of an Automatic Aquaculture Bottom Feeder Using a Closed-Type Impeller. AgriEngineering, 8(6), 210. https://doi.org/10.3390/agriengineering8060210

Vancouver

Dorongon JPI, Zubia OF, Sanchez PRP, Gallegos RKB, Borja AA. Development of an Automatic Aquaculture Bottom Feeder Using a Closed-Type Impeller. AgriEngineering. 2026;8(6):210. doi:10.3390/agriengineering8060210

BibTeX
@article{Dorongon2026,
  author = {Dorongon, Jose Pocholo I. and Zubia, Omar F. and Sanchez, Paolo Rommel P. and Gallegos, Ralph Kristoffer B. and Borja, Adrian A.},
  title = {Development of an Automatic Aquaculture Bottom Feeder Using a Closed-Type Impeller},
  journal = {AgriEngineering},
  year = {2026},
  volume = {8},
  number = {6},
  pages = {210},
  doi = {10.3390/agriengineering8060210}
}
Kostenlos starten →