Design and Performance Evaluation of a Vacuum-Based Twist–Bend End-Effector for Automated Mushroom Harvesting with Vision-Based Damage Assessment
AgriEngineering · 10.04.2026 · 8 (4) · 151
DOI: 10.3390/agriengineering8040151 ↗Kurz gefasst
Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 10.04.2026. Verfasst von Kittiphum Pawikhum und 4 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: United States Department of Agriculture, National Institute of Food and Agriculture (USDA NIFA), Federal Appropriations, USDA National Institute of Food and Agriculture Specialty Crop Research Initiative, University of Tennessee Institute of Agriculture.
Abstract (Originalsprache)
Manual harvesting of white button mushrooms involves coordinated bending and twisting motions to detach the fruiting body while minimizing surface damage; however, replicating these actions in automated systems remains challenging. In this study, a vacuum-based end-effector that mimics manual twist–bend detachment using a single-point contact was designed and evaluated to reduce mechanical damage. Key detachment parameters, including the friction coefficient (mean 0.62), bending angle (average 5.72°), and twisting torque (average 2.56 N·m), were experimentally analyzed to determine the minimum vacuum pressures required for effective bending and twisting, which were −8.64 ± 2.21 kPa and −8.91 ± 2.45 kPa, respectively, with no significant difference observed between the two motions (p = 0.51). A customized vision-based image processing algorithm was developed to quantify postharvest surface damage using a whiteness index (WI). An optimal vacuum pressure of −17.17 kPa was identified, together with a bending angle of 10° and a twisting angle of 90°, balancing high harvesting success with preservation of mushroom quality. The results highlight the influence of end-effector design parameters, including vacuum cup material, contact area, bending direction, and vacuum application duration, on harvesting performance and product marketability, supporting the development of robotic systems for fresh mushroom harvesting.
Förderung
- United States Department of Agriculture, National Institute of Food and Agriculture (USDA NIFA), Federal Appropriations
- USDA National Institute of Food and Agriculture Specialty Crop Research Initiative
- University of Tennessee Institute of Agriculture
Zitieren
APA
Pawikhum, K., Yang, Y., He, L., Pecchia, J. A., & Heinemann, P. (2026). Design and Performance Evaluation of a Vacuum-Based Twist–Bend End-Effector for Automated Mushroom Harvesting with Vision-Based Damage Assessment. AgriEngineering, 8(4), 151. https://doi.org/10.3390/agriengineering8040151
Vancouver
Pawikhum K, Yang Y, He L, Pecchia JA, Heinemann P. Design and Performance Evaluation of a Vacuum-Based Twist–Bend End-Effector for Automated Mushroom Harvesting with Vision-Based Damage Assessment. AgriEngineering. 2026;8(4):151. doi:10.3390/agriengineering8040151
BibTeX
@article{Pawikhum2026,
author = {Pawikhum, Kittiphum and Yang, Yanqiu and He, Long and Pecchia, John A. and Heinemann, Paul},
title = {Design and Performance Evaluation of a Vacuum-Based Twist–Bend End-Effector for Automated Mushroom Harvesting with Vision-Based Damage Assessment},
journal = {AgriEngineering},
year = {2026},
volume = {8},
number = {4},
pages = {151},
doi = {10.3390/agriengineering8040151}
}
EUVIMED