Study on the Separation Mechanism of Walnut Shell Kernels on Different Inclined Vibrating Screens
AgriEngineering · 20.11.2025 · 7 (11) · 396
DOI: 10.3390/agriengineering7110396 ↗Kurz gefasst
Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 20.11.2025. Verfasst von Yongcheng Zhang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China-Xinjiang Joint Fund, National Forestry and Grassland Equipment Science and Technology Innovation Park, Tarim University President Fund Project.
Abstract (Originalsprache)
The separation of walnut kernels from shells is a crucial step in walnut processing. Pneumatic sorting is the mainstream method. However, due to the overlapping suspension speeds of half-shells and eighth-shells, complete separation was not achieved. This paper proposes using a toothed vibrating screen to separate the two. Using EDEM to simulate and analyze the motion forms, collision processes, and stress conditions of walnut shells and kernels on the vibrating screen, the effectiveness of this method was demonstrated, and the mechanisms of shell–kernel retention and loss during the separation process were revealed. Results indicate that 1/8 kernels, being smaller, easily fall into tooth grooves and move upward step by step under the excitation force during reciprocating vibration. The 1/2 shells, being larger, are difficult to fall into the teeth grooves, and their smooth surfaces cause them to slide easily, moving downward continuously under the action of reciprocating vibration and gravity. Using the cleaning rate and loss rate as evaluation indicators, it was found that as the inclination angle of the vibrating screen increased step by step, the cleaning rate consistently increased monotonously. The loss rate initially rose slowly, then surged sharply after reaching 22°, at which point the loss rate was at its lowest, around 10%, and the cleaning rate was at its maximum, at 95%. The shortest retention time of walnut shells on the screen is 2.85 s, and the longest is 10.6 s, with the number of collisions being 458 and 2619, respectively; the collisions between the shells and the kernels account for 51.8%. The failure to thoroughly separate is due to the shell and kernel entangling within the separation area, making it impossible to segregate them. They enter the opposite region, collide, and cause loss and retention phenomena.
Förderung
- National Natural Science Foundation of China-Xinjiang Joint Fund
- National Forestry and Grassland Equipment Science and Technology Innovation Park
- Tarim University President Fund Project
- Xinjiang Uygur Autonomous Region
Zitieren
APA
Zhang, Y., Wang, C., Zong, W., Zhang, H., Li, Z., Gai, G., Chen, P., & Ma, J. (2025). Study on the Separation Mechanism of Walnut Shell Kernels on Different Inclined Vibrating Screens. AgriEngineering, 7(11), 396. https://doi.org/10.3390/agriengineering7110396
Vancouver
Zhang Y, Wang C, Zong W, Zhang H, Li Z, Gai G, et al. Study on the Separation Mechanism of Walnut Shell Kernels on Different Inclined Vibrating Screens. AgriEngineering. 2025;7(11):396. doi:10.3390/agriengineering7110396
BibTeX
@article{Zhang2025,
author = {Zhang, Yongcheng and Wang, Changqi and Zong, Wangyuan and Zhang, Hong and Li, Zhanbiao and Gai, Guangxin and Chen, Peiyu and Ma, Jiale},
title = {Study on the Separation Mechanism of Walnut Shell Kernels on Different Inclined Vibrating Screens},
journal = {AgriEngineering},
year = {2025},
volume = {7},
number = {11},
pages = {396},
doi = {10.3390/agriengineering7110396}
}
EUVIMED