EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of a Testing Method for the Accuracy and Precision of GNSS and LiDAR Technology

Kerin F. Romero, Yorbi Castillo, Marcelo Quesada, Yorjani Zumbado, Juan Carlos Jiménez

AgriEngineering · 22.09.2025 · 7 (9) · 310

DOI: 10.3390/agriengineering7090310 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 22.09.2025. Verfasst von Kerin F. Romero und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Vice-Rectorate of Research and Outreach of the Costa Rica Institute of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluates the positional accuracy of Global Navigation Satellite Systems (GNSS) and Unmanned Aerial vehicle (UAV)-based LiDAR systems in terrain modeling, using a total station as a reference. The research was conducted over 17 Ground Control Points (GCPs), with measurements obtained using a CHCNAV i50 GNSS receiver and a DJI Zenmuse L1 Light Detection and Ranging (LiDAR) sensor mounted on a UAV. Accuracy was assessed for horizontal (X, Y) and vertical (Z) components by comparing the results against total station data. Errors were quantified using statistical metrics such as Mean Absolute Error (MAE), Root Mean Square Error (RMSE), and RMS at 1σ. GNSS exhibited superior horizontal accuracy with an RMS 1σ of 1.1 cm, while LiDAR achieved 1.7 cm. In contrast, GNSS outperformed LiDAR in vertical precision, achieving a 1σ RMS of 6.4 cm compared to 6.6 cm for LiDAR. These findings align with manufacturer specifications and international standards such as those of the American Society for Photogrammetry and Remote Sensing (ASPRS). The results highlight that GNSS is preferable for applications requiring high horizontal precision, while LiDAR is better suited for vertical modeling and terrain analysis. The combination of both systems may offer enhanced results for comprehensive geospatial surveys. Overall, both technologies demonstrated sub-decimetric accuracy suitable for precision agriculture, civil engineering, and environmental monitoring.

Förderung

  • Vice-Rectorate of Research and Outreach of the Costa Rica Institute of Technology

Zitieren

APA

Romero, K. F., Castillo, Y., Quesada, M., Zumbado, Y., & Jiménez, J. C. (2025). Development of a Testing Method for the Accuracy and Precision of GNSS and LiDAR Technology. AgriEngineering, 7(9), 310. https://doi.org/10.3390/agriengineering7090310

Vancouver

Romero KF, Castillo Y, Quesada M, Zumbado Y, Jiménez JC. Development of a Testing Method for the Accuracy and Precision of GNSS and LiDAR Technology. AgriEngineering. 2025;7(9):310. doi:10.3390/agriengineering7090310

BibTeX
@article{Romero2025,
  author = {Romero, Kerin F. and Castillo, Yorbi and Quesada, Marcelo and Zumbado, Yorjani and Jiménez, Juan Carlos},
  title = {Development of a Testing Method for the Accuracy and Precision of GNSS and LiDAR Technology},
  journal = {AgriEngineering},
  year = {2025},
  volume = {7},
  number = {9},
  pages = {310},
  doi = {10.3390/agriengineering7090310}
}
Kostenlos starten →