IoT-Enabled Soil Moisture and Conductivity Monitoring Under Controlled and Field Fertigation Systems
AgriEngineering · 01.07.2025 · 7 (7) · 207
DOI: 10.3390/agriengineering7070207 ↗Kurz gefasst
Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 01.07.2025. Verfasst von Soni Kumari und 3 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Michigan Department of Agricultural Rural Development Specialty Crop Block, Ag Climate Resiliency Program.
Abstract (Originalsprache)
Precision agriculture increasingly relies on real-time data from soil sensors to optimize irrigation and nutrient application. Soil moisture and electrical conductivity (EC) are key indicators in irrigation and fertigation systems, directly affecting water-use efficiency and nutrient delivery to crops. This study evaluates the performance of an IoT-based soil-monitoring system for real-time tracking of EC and soil moisture under varied fertigation conditions in both laboratory and field scenarios. The EC sensor showed strong agreement with laboratory YSI measurements (R2 = 0.999), confirming its accuracy. Column experiments were conducted in three soil types (sand, sandy loam, and loamy sand) to assess the EC and soil moisture response to fertigation. Sand showed rapid infiltration and low retention, with EC peaking at 420 µS/cm and moisture 0.33 cm3/cm3, indicating high leaching risk. Sandy loam retained the most moisture (0.35 cm3/cm3) and showed the highest EC (550 µS/cm), while loamy sand exhibited intermediate behavior. Fertilizer-specific responses showed higher EC in Calcium Ammonium Nitrate (CAN)-treated soils, while Monoammonium Phosphate (MAP) showed lower, more stable EC due to limited phosphorus mobility. Field validation confirmed that the IoT system effectively captured irrigation and fertigation events through synchronized EC and moisture peaks. These findings highlight the efficacy of IoT-based sensor networks for continuous, high-resolution soil monitoring and their potential to support precision fertigation strategies, enhancing nutrient-use efficiency while minimizing environmental losses.
Förderung
- Michigan Department of Agricultural Rural Development Specialty Crop Block
- Ag Climate Resiliency Program
Zitieren
APA
Kumari, S., Ali, N., Dagati, M., & Dong, Y. (2025). IoT-Enabled Soil Moisture and Conductivity Monitoring Under Controlled and Field Fertigation Systems. AgriEngineering, 7(7), 207. https://doi.org/10.3390/agriengineering7070207
Vancouver
Kumari S, Ali N, Dagati M, Dong Y. IoT-Enabled Soil Moisture and Conductivity Monitoring Under Controlled and Field Fertigation Systems. AgriEngineering. 2025;7(7):207. doi:10.3390/agriengineering7070207
BibTeX
@article{Kumari2025,
author = {Kumari, Soni and Ali, Nawab and Dagati, Mia and Dong, Younsuk},
title = {IoT-Enabled Soil Moisture and Conductivity Monitoring Under Controlled and Field Fertigation Systems},
journal = {AgriEngineering},
year = {2025},
volume = {7},
number = {7},
pages = {207},
doi = {10.3390/agriengineering7070207}
}
EUVIMED