Optimization of the Design of a Greenhouse LED Luminaire with Immersion Cooling
AgriEngineering · 19.09.2024 · 6 (3) · 3460-3473
DOI: 10.3390/agriengineering6030197 ↗Kurz gefasst
Fachartikel in der Zeitschrift AgriEngineering, online erschienen am 19.09.2024. Verfasst von Pavel V. Tikhonov und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.
Abstract (Originalsprache)
Modern agriculture, with the use of artificial lighting, requires high-intensity LED luminaires with compact dimensions. In this regard, new approaches to the design of LED luminaires using both new materials and technical solutions have been considered. The theoretical evaluation of the influence of different materials on the efficiency of removal of thermal energy from LEDs was shown. A new material PMS-5 is proposed and evaluated as an immersion liquid, which can be used as an effective heat sink in the lower part of the luminaire up to the level of LEDs located in the top light LED luminaires. The proposed polymethylsiloxane PMS-5 liquid has more than twice the thermal conductivity (0.167 W/(m·K)) of HFE7200 and NS15 liquids used in immersion-cooled LED luminaires. Based on the theoretical evaluation, the requirements for parameters, such as metal profile area, immersion liquid volume, wall thickness area, and external area of the cylinder, are highlighted and shown. The noted parameters have a key role in the design of an efficient top light LED luminaire. It has been shown that the design of the metal profile significantly affects the efficiency of the removal of thermal energy from LEDs and it is necessary to use specialized profiles optimized for the diameter of the LED luminaire cylinder. A number of LED luminaire designs were proposed, depending on the thermal properties of the construction materials, technical and economic performance, as well as actual operating and installation conditions. The analysis of the presented theoretical evaluations allowed overlay of the design basis of LED luminaires within the presented concept and top light.
Förderung
- Ministry of Science and Higher Education of the Russian Federation
Zitieren
APA
Tikhonov, P. V., Smirnov, A. A., Proshkin, Y. A., Burynin, D. A., Kachan, S. A., & Dorokhov, A. S. (2024). Optimization of the Design of a Greenhouse LED Luminaire with Immersion Cooling. AgriEngineering, 6(3), 3460-3473. https://doi.org/10.3390/agriengineering6030197
Vancouver
Tikhonov PV, Smirnov AA, Proshkin YA, Burynin DA, Kachan SA, Dorokhov AS. Optimization of the Design of a Greenhouse LED Luminaire with Immersion Cooling. AgriEngineering. 2024;6(3):3460-3473. doi:10.3390/agriengineering6030197
BibTeX
@article{Tikhonov2024,
author = {Tikhonov, Pavel V. and Smirnov, Alexander A. and Proshkin, Yuri A. and Burynin, Dmitry A. and Kachan, Sergey A. and Dorokhov, Alexey S.},
title = {Optimization of the Design of a Greenhouse LED Luminaire with Immersion Cooling},
journal = {AgriEngineering},
year = {2024},
volume = {6},
number = {3},
pages = {3460--3473},
doi = {10.3390/agriengineering6030197}
}
EUVIMED