Wear Calculation Method of Tripping Mechanism of Knotter Based on Rigid–Flexible Coupling Dynamic Model
Agriculture · 25.10.2025 · 15 (21) · 2229
DOI: 10.3390/agriculture15212229 ↗Kurz gefasst
Fachartikel in der Zeitschrift Agriculture, online erschienen am 25.10.2025. Verfasst von Jianjun Yin und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Special Fund Project of Xinjiang Production and Construction Corps.
Abstract (Originalsprache)
Targeting the problem of lack of theoretical model for wear calculation of key actuators in the knotter, a tripping mechanism of knotter based on the principle of elastic deformation was designed. A rigid–flexible coupling dynamic analysis model of the tripping mechanism was established based on the modal stress method, and the contact force time history curves and dynamic stress results between the groove cam and the ball roller, as well as between the knotter jaw and the tripping plate slot, were simulated. Based on MSC, Marc MENTAT, a finite element wear calculation model of the tripping mechanism, was constructed. Through 600 simulations equivalent to 6000 working cycles, the wear cloud maps of the tripping plate and the large gear groove cam were obtained, and the key wear areas and expansion trends were analyzed. The rapid wear tests were conducted by using a self-made knotter fatigue wear test bench, which showed that the maximum deviation between the measured value and the simulated value of the contact pair wear was less than 10%. This verified that the proposed wear model for the tripping mechanism can be used for calculating the contact pair wear of the mechanism, providing a reference for the heat treatment process of the surface hardness of the parts.
Förderung
- National Natural Science Foundation of China
- Science and Technology Special Fund Project of Xinjiang Production and Construction Corps
Zitieren
APA
Yin, J., Gao, Y., Guo, R., Lv, S., Zhou, M., & Yu, D. (2025). Wear Calculation Method of Tripping Mechanism of Knotter Based on Rigid–Flexible Coupling Dynamic Model. Agriculture, 15(21), 2229. https://doi.org/10.3390/agriculture15212229
Vancouver
Yin J, Gao Y, Guo R, Lv S, Zhou M, Yu D. Wear Calculation Method of Tripping Mechanism of Knotter Based on Rigid–Flexible Coupling Dynamic Model. Agriculture. 2025;15(21):2229. doi:10.3390/agriculture15212229
BibTeX
@article{Yin2025,
author = {Yin, Jianjun and Gao, Yansu and Guo, Ruipeng and Lv, Shiyu and Zhou, Maile and Yu, Deng},
title = {Wear Calculation Method of Tripping Mechanism of Knotter Based on Rigid–Flexible Coupling Dynamic Model},
journal = {Agriculture},
year = {2025},
volume = {15},
number = {21},
pages = {2229},
doi = {10.3390/agriculture15212229}
}
EUVIMED