Comprehensive Assessment of BDS Precise Orbit and Clock Products from IGS MGEX Analysis Centers
Aerospace · 18.11.2026 · 13 (11) · 1077
DOI: 10.3390/aerospace13111077 ↗Kurz gefasst
Fachartikel in der Zeitschrift Aerospace, online erschienen am 18.11.2026. Verfasst von Jing Qiao und 2 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shanghai Key Laboratory of Space Navigation and Positioning Techniques, Science and Technology Commission of Shanghai Municipality.
Abstract (Originalsprache)
High-quality precise orbit and clock products are essential for high-precision positioning and space-geodetic applications, yet substantial quality differences are observed across orbit types and satellite products. The BeiDou Navigation Satellite System (BDS) precise orbit and clock products from 2025, provided by four analysis centers (ACs) of the International GNSS Service (IGS) Multi-GNSS Experiment (MGEX), are assessed using inter-center comparisons, Satellite Laser Ranging (SLR) validation, Allan deviation (ADEV) analysis, and static precise point positioning (PPP). For BDS-3 medium Earth orbit (MEO) satellites, the root mean square (RMS) values of three-dimensional (3D) orbit differences and clock residuals are 4.10–5.92 cm and 0.08–0.16 ns (2.4–4.8 cm in equivalent range), respectively. These values are 38.3–59.9% and 15.8–50.0% lower than those for BDS-2 MEO satellites. Inclined geosynchronous orbit (IGSO) satellite products exhibit markedly larger inter-center differences, with BDS-3 orbit-difference and clock-residual RMS values reaching up to 19.99 cm and 0.52 ns (15.6 cm in equivalent range), respectively. SLR validation gives group-level mean residuals of 3.58–5.61 cm for BDS-3 CAST satellites and −3.00 to −0.64 cm for SECM satellites, with standard deviations of 3.22–4.45 cm and 2.15–3.01 cm, respectively. Solar-geometry-dependent residual variations are observed for satellites with space vehicle numbers (SVNs) C215 and C223. Static PPP yields 3D RMS values of coordinate differences relative to the IGS weekly reference coordinates ranging from 1.82 to 4.72 cm across the four ACs. Adding IGSO satellites improves satellite visibility and observation geometry but does not consistently improve coordinate accuracy. Overall, BDS-3 MEO products demonstrate high inter-center consistency, whereas IGSO satellites and several anomalous spacecraft remain the primary limitations to further product refinement.
Förderung
- National Natural Science Foundation of China
- Shanghai Key Laboratory of Space Navigation and Positioning Techniques
- Science and Technology Commission of Shanghai Municipality
- Fundamental Research Funds for the Central Universities
- Joint Research Project of the Yangtze River Delta Science and Technology Innovation Community
Zitieren
APA
Qiao, J., Liu, S., & Ge, H. (2026). Comprehensive Assessment of BDS Precise Orbit and Clock Products from IGS MGEX Analysis Centers. Aerospace, 13(11), 1077. https://doi.org/10.3390/aerospace13111077
Vancouver
Qiao J, Liu S, Ge H. Comprehensive Assessment of BDS Precise Orbit and Clock Products from IGS MGEX Analysis Centers. Aerospace. 2026;13(11):1077. doi:10.3390/aerospace13111077
BibTeX
@article{Qiao2026,
author = {Qiao, Jing and Liu, Shuping and Ge, Haibo},
title = {Comprehensive Assessment of BDS Precise Orbit and Clock Products from IGS MGEX Analysis Centers},
journal = {Aerospace},
year = {2026},
volume = {13},
number = {11},
pages = {1077},
doi = {10.3390/aerospace13111077}
}
EUVIMED