EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characterizations of Swept Shock/Boundary Layer Interactions: A Comparison Between Planar Shock, Curved Shock, and Isentropic Compression

Fajia Sheng, Dengxue Song, Hexia Huang, Huijun Tan, Xiankai Li, Zhiyu Zhang

Aerospace · 10.06.2026 · 13 (6) · 539

DOI: 10.3390/aerospace13060539 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace, online erschienen am 10.06.2026. Verfasst von Fajia Sheng und 5 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the flow characteristics of three-dimensional swept interactions, 3D steady Reynolds-averaged Navier–Stokes (RANS) simulations are conducted at an incoming Mach number of 3.5 and a Reynolds number of 30,955 based on the incoming boundary-layer thickness δ0. Three independent compression configurations with a total compression angle of 18° are analyzed and compared: planar swept shocks, curved swept shocks featuring an initial 2° deflection step followed by a continuously curved compression surface, and continuous isentropic compression waves. The results demonstrate that, unlike the baseline planar case, the interactions induced by both curved swept shocks and isentropic compression waves depart from the canonical quasi-conical similarity and transcend existing topological classification frameworks. These non-planar interactions are characterized by large-scale primary vortices and small-scale corner vortices that evolve along curved trajectories downstream. Quantitatively, the curved shock interaction yields maximum normal scales of 5.4δ0 for the primary vortex and 1.8δ0 for the corner vortex—significantly more compact than the 6.7δ0 and 7.5δ0 observed in the planar-shock interaction. Furthermore, the specific modality of compression—whether by discrete shock or continuous wave—exerts a profound effect on aerodynamic performance. Under the present conditions, while isentropic compression achieves the highest compression efficiency and planar shocks provide superior mass flow capture, curved shock compression strikes a favorable balance between these competing metrics. Curved shock configurations may offer potential for improving integrated inlet performance through appropriate adjustment of the initial shock strength.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Sheng, F., Song, D., Huang, H., Tan, H., Li, X., & Zhang, Z. (2026). Characterizations of Swept Shock/Boundary Layer Interactions: A Comparison Between Planar Shock, Curved Shock, and Isentropic Compression. Aerospace, 13(6), 539. https://doi.org/10.3390/aerospace13060539

Vancouver

Sheng F, Song D, Huang H, Tan H, Li X, Zhang Z. Characterizations of Swept Shock/Boundary Layer Interactions: A Comparison Between Planar Shock, Curved Shock, and Isentropic Compression. Aerospace. 2026;13(6):539. doi:10.3390/aerospace13060539

BibTeX
@article{Sheng2026,
  author = {Sheng, Fajia and Song, Dengxue and Huang, Hexia and Tan, Huijun and Li, Xiankai and Zhang, Zhiyu},
  title = {Characterizations of Swept Shock/Boundary Layer Interactions: A Comparison Between Planar Shock, Curved Shock, and Isentropic Compression},
  journal = {Aerospace},
  year = {2026},
  volume = {13},
  number = {6},
  pages = {539},
  doi = {10.3390/aerospace13060539}
}
Kostenlos starten →