EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermo-Mechanical Analysis of Preload Distribution in Clamp Band Separation Mechanisms

Hanxin Lin, Bing Yu, Jia Guo, Hongjian Zhang, Caishan Liu

Aerospace · 05.06.2026 · 13 (6) · 530

DOI: 10.3390/aerospace13060530 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace, online erschienen am 05.06.2026. Verfasst von Hanxin Lin und 4 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Clamp band separation mechanisms are widely used in spacecraft interfaces, and the clamp band preload is a key factor governing both connection reliability and separation performance. The conventional torque-control method is susceptible to friction-induced preload non-uniformity in clamp band separation mechanisms. To overcome this limitation, thermal preloading has been proposed as an alternative installation method. In this paper, a thermo-mechanical analytical model is established for clamp band separation mechanisms during thermal preloading based on curved-beam and thin-shell theories. Theoretical analysis shows that the preload distribution can be divided into three characteristic zones: a stick zone, a slip zone, and a separation zone. In the stick zone, the preload remains constant and is mainly governed by thermal stress and structural relative stiffness. In the slip zone, friction dominates the load transfer, leading to a non-uniform preload distribution. In the separation zone, local disengagement occurs near the clamp band joint end due to the eccentricity-induced bending moment. The proposed model is validated by finite element simulations, and parametric studies are conducted to reveal the effects of friction coefficient and structural geometric parameters on preload distribution. Based on the theoretical model, a zoned-heating method is proposed to improve preload uniformity, providing a useful reference for optimizing the thermal preloading method.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Lin, H., Yu, B., Guo, J., Zhang, H., & Liu, C. (2026). Thermo-Mechanical Analysis of Preload Distribution in Clamp Band Separation Mechanisms. Aerospace, 13(6), 530. https://doi.org/10.3390/aerospace13060530

Vancouver

Lin H, Yu B, Guo J, Zhang H, Liu C. Thermo-Mechanical Analysis of Preload Distribution in Clamp Band Separation Mechanisms. Aerospace. 2026;13(6):530. doi:10.3390/aerospace13060530

BibTeX
@article{Lin2026,
  author = {Lin, Hanxin and Yu, Bing and Guo, Jia and Zhang, Hongjian and Liu, Caishan},
  title = {Thermo-Mechanical Analysis of Preload Distribution in Clamp Band Separation Mechanisms},
  journal = {Aerospace},
  year = {2026},
  volume = {13},
  number = {6},
  pages = {530},
  doi = {10.3390/aerospace13060530}
}
Kostenlos starten →