EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Distributed Formation Control Method with Hierarchical Leader–Follower Architecture and Repulsive Function-Based Obstacle Avoidance for UAV Formation Flight

Jaewan Choi, Younghoon Choi

Aerospace · 04.06.2026 · 13 (6) · 526

DOI: 10.3390/aerospace13060526 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace, online erschienen am 04.06.2026. Verfasst von Jaewan Choi und 1 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Gyeonggi-do Regional Research Center.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In modern battlefields, the rapid advancement of Counter-UAV (C-UAV) technologies has made single-UAV missions increasingly difficult. This highlights the need for distributed swarm systems that can operate reliably under such threats. Among various swarm coordination methods, hierarchical leader–follower structures have been actively studied for battlefield environments with high risk of agent loss and limited communication. The Virtual Leader-based Formation System (VLFS), which follows this structure, enables formation through a virtual leader. It also introduces a novel collision avoidance approach that allows followers to avoid obstacles during formation flight. However, the conventional VLFS suffers from long convergence time with severe oscillations. In addition, it does not consider inter-UAV collisions and has demonstrated avoidance only in simple obstacle environments. To address these limitations, this paper proposes the VLFS-RF method, which directly integrates a repulsive function into the VLFS. The proposed method consists of four control modes that perform formation tracking, inter-UAV collision avoidance, and obstacle avoidance simultaneously according to the situation. Software-In-The-Loop (SITL) simulations were conducted in a ROS-Gazebo environment using V-shaped and hexagonal formations. The results show that the formation tracking error is reduced by approximately 59% compared to the conventional VLFS. In addition, inter-UAV collisions are prevented during initial convergence, and obstacles are successfully avoided in narrow passages and gaps between two obstacles. These results demonstrate that VLFS-RF is a practical formation control method for UAV swarms in complex environments.

Förderung

  • Gyeonggi-do Regional Research Center

Zitieren

APA

Choi, J., & Choi, Y. (2026). Distributed Formation Control Method with Hierarchical Leader–Follower Architecture and Repulsive Function-Based Obstacle Avoidance for UAV Formation Flight. Aerospace, 13(6), 526. https://doi.org/10.3390/aerospace13060526

Vancouver

Choi J, Choi Y. Distributed Formation Control Method with Hierarchical Leader–Follower Architecture and Repulsive Function-Based Obstacle Avoidance for UAV Formation Flight. Aerospace. 2026;13(6):526. doi:10.3390/aerospace13060526

BibTeX
@article{Choi2026,
  author = {Choi, Jaewan and Choi, Younghoon},
  title = {Distributed Formation Control Method with Hierarchical Leader–Follower Architecture and Repulsive Function-Based Obstacle Avoidance for UAV Formation Flight},
  journal = {Aerospace},
  year = {2026},
  volume = {13},
  number = {6},
  pages = {526},
  doi = {10.3390/aerospace13060526}
}
Kostenlos starten →