EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Downwash-Aware Design of a Long-Reach Aerial Manipulator for Multirotor UAVs

Boyang Jiang, Zhongjing Ren, Xicai Li, Aibin Yang

Aerospace · 30.05.2026 · 13 (6) · 511

DOI: 10.3390/aerospace13060511 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace, online erschienen am 30.05.2026. Verfasst von Boyang Jiang und 3 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aerial manipulation tasks performed by multirotor unmanned aerial vehicles (UAVs) are often constrained by rotor-induced downwash, which generates a concentrated high-momentum axial core capable of destabilizing lightweight manipulators and payloads. This paper proposes a downwash-aware design framework for a long-reach, three-degree-of-freedom (3-DOF) aerial manipulator explicitly optimized to mitigate aerodynamic disturbances. The framework integrates CFD-based characterization of the rotor downwash, forward-kinematic modeling, workspace reconstruction, and experimental validation under controlled and real-flight conditions to ensure that the end-effector operates outside the strong-disturbance zone. Link lengths of 0.40 m and 0.80 m were selected to balance operational reach, aerodynamic safety, and platform stability. A controlled measurement setup was established for validation of the CFD numerical model, where the UAV was laterally fixed on a rigid support frame to eliminate flight-induced motion. The experimental results on the velocities at targeted locations show a good agreement with the CFD-predicted velocity profiles, confirming the reliability of the flow-field prediction model. A prototype integrated with a six-rotor UAV was experimentally validated under real flight conditions, demonstrating stable takeoff, manipulator deployment, and retraction, with a visually observable reduction in end-effector oscillation tendency. Several representative grasping configurations where the airflow velocity at the end-effector remained below the threshold of 1 m/s, or a weak-disturbance region, were identified and achieved via manipulation of the UAV system. We envision promising applications of the downwash-aware design of multirotor UAVs with aerial manipulator in high-altitude sampling, precision harvesting, and other contact-intensive aerial manipulation tasks.

Förderung

  • China Postdoctoral Science Foundation

Zitieren

APA

Jiang, B., Ren, Z., Li, X., & Yang, A. (2026). Downwash-Aware Design of a Long-Reach Aerial Manipulator for Multirotor UAVs. Aerospace, 13(6), 511. https://doi.org/10.3390/aerospace13060511

Vancouver

Jiang B, Ren Z, Li X, Yang A. Downwash-Aware Design of a Long-Reach Aerial Manipulator for Multirotor UAVs. Aerospace. 2026;13(6):511. doi:10.3390/aerospace13060511

BibTeX
@article{Jiang2026,
  author = {Jiang, Boyang and Ren, Zhongjing and Li, Xicai and Yang, Aibin},
  title = {Downwash-Aware Design of a Long-Reach Aerial Manipulator for Multirotor UAVs},
  journal = {Aerospace},
  year = {2026},
  volume = {13},
  number = {6},
  pages = {511},
  doi = {10.3390/aerospace13060511}
}
Kostenlos starten →