EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Flow Mixing and Oblique-Detonation Ignition Characteristics of RP-3 Aviation Kerosene in a Constrained Supersonic Flow Channel

Zijie Wu, Baoxing Li, Kun Wang, Ronggang Wei, Chengfeng Wu, Shaoqing Hu

Aerospace · 23.05.2026 · 13 (6) · 489

DOI: 10.3390/aerospace13060489 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace, online erschienen am 23.05.2026. Verfasst von Zijie Wu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Oblique detonation engines have been proposed for hypersonic propulsion because detonation-based heat addition can, in principle, provide rapid energy release with reduced total-pressure penalties. We investigate non-premixed injection/mixing of an RP-3 aviation-kerosene surrogate in a constrained supersonic channel and its impact on oblique-detonation initiation, stabilization, and static pressure gain. Numerical simulations are performed for a Mach 8 inflow representative of a 30 km altitude condition using an OpenFOAM v7-based reacting-flow solver. We analyze the pressure-gain process following detonation onset, quantify the effects of the inducer-ramp angle, and qualitatively assess the predicted initiation/stabilization trends against direct-connect hot-fire experiments. The results show that non-premixed injection into a supersonic crossflow yields limited mixing over the available mixing length and results in a strongly stratified inflow to the combustor. In the constrained passage, a train of reflected shocks forms and progressively reduces the total-pressure recovery factor along the mixing section, which asymptotically approaches ~0.49. In the combustor, the inducer-ramp angle controls whether and how a stabilized oblique detonation can be established. For a 25° ramp, no self-sustained ODW is obtained under the present conditions, whereas stabilized ODWs are observed for 30° and 35° ramps, exhibiting abrupt and smooth topologies, respectively. These initiation thresholds and stabilized morphologies show qualitative consistency with the direct-connect observations. Due to fuel stratification, pressure gain varies among streamlines but consistently follows a “primary compression–plateau–secondary pressure rise” sequence; the secondary stage contributes approximately 17.54–27.98% of the static pressure rise.

Zitieren

APA

Wu, Z., Li, B., Wang, K., Wei, R., Wu, C., & Hu, S. (2026). Study on the Flow Mixing and Oblique-Detonation Ignition Characteristics of RP-3 Aviation Kerosene in a Constrained Supersonic Flow Channel. Aerospace, 13(6), 489. https://doi.org/10.3390/aerospace13060489

Vancouver

Wu Z, Li B, Wang K, Wei R, Wu C, Hu S. Study on the Flow Mixing and Oblique-Detonation Ignition Characteristics of RP-3 Aviation Kerosene in a Constrained Supersonic Flow Channel. Aerospace. 2026;13(6):489. doi:10.3390/aerospace13060489

BibTeX
@article{Wu2026,
  author = {Wu, Zijie and Li, Baoxing and Wang, Kun and Wei, Ronggang and Wu, Chengfeng and Hu, Shaoqing},
  title = {Study on the Flow Mixing and Oblique-Detonation Ignition Characteristics of RP-3 Aviation Kerosene in a Constrained Supersonic Flow Channel},
  journal = {Aerospace},
  year = {2026},
  volume = {13},
  number = {6},
  pages = {489},
  doi = {10.3390/aerospace13060489}
}
Kostenlos starten →