EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fatigue Life Prediction and Experimental Study of Landing Gear Components via FKM Local Stress Approach

Haihong Tang, Huijie Zhou, Panglun Liu, Jianbin Ding, Yiyao Jiang, Bingyan Jiang

Aerospace · 19.11.2025 · 12 (11) · 1026

DOI: 10.3390/aerospace12111026 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace, online erschienen am 19.11.2025. Verfasst von Haihong Tang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MIIT.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on high-cycle fatigue (HCF) of aircraft landing gear (LG) components, covering material testing, full-scale component experiments, finite element (FE) modeling, life-prediction comparison, and probabilistic assessment. Fully reversed axial fatigue tests on forty 300M steel specimens were conducted to establish a reliable S-N curve. Full-scale fatigue experiment conducted on the upper torque link components showed that the one cracking at approximately 184,000 cycles (at the filet), while another remained undamaged after 166,000 cycles, providing a benchmark for model validation. FE simulations using ANSYS accurately captured the stress field within the component, with a maximum error of less than 10% compared to experimental strain measurements. Based on the FKM guideline, this work developed an improved FKM local-stress approach (LSA) for HCF life prediction, which integrates load-dependent stress gradients, FKM mean stress correction, and interpolated surface-condition factors for S-N curve adjustment specific to the component’s surface treatment. It predicts the fatigue life as 174,000 cycles (−5.4% error relative to test), outperforming standard FKM-LSA calculations and nCode software simulations. Furthermore, by augmenting the experimental data and constructing p-S-N curves, the improved LSA was extended to predict fatigue life under different survival probabilities and confidence levels, providing a practical tool for reliability-based design.

Förderung

  • MIIT

Zitieren

APA

Tang, H., Zhou, H., Liu, P., Ding, J., Jiang, Y., & Jiang, B. (2025). Fatigue Life Prediction and Experimental Study of Landing Gear Components via FKM Local Stress Approach. Aerospace, 12(11), 1026. https://doi.org/10.3390/aerospace12111026

Vancouver

Tang H, Zhou H, Liu P, Ding J, Jiang Y, Jiang B. Fatigue Life Prediction and Experimental Study of Landing Gear Components via FKM Local Stress Approach. Aerospace. 2025;12(11):1026. doi:10.3390/aerospace12111026

BibTeX
@article{Tang2025,
  author = {Tang, Haihong and Zhou, Huijie and Liu, Panglun and Ding, Jianbin and Jiang, Yiyao and Jiang, Bingyan},
  title = {Fatigue Life Prediction and Experimental Study of Landing Gear Components via FKM Local Stress Approach},
  journal = {Aerospace},
  year = {2025},
  volume = {12},
  number = {11},
  pages = {1026},
  doi = {10.3390/aerospace12111026}
}
Kostenlos starten →