EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Nacelle Inlet Geometry on Crosswind Distortion Under Ground Static Conditions

Xiufeng Song, Binbin Tang, Changkun Li, Zhenlong Wu

Aerospace · 25.10.2025 · 12 (11) · 955

DOI: 10.3390/aerospace12110955 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace, online erschienen am 25.10.2025. Verfasst von Xiufeng Song und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Aeronautical Science Foundation of China, National Natural Science Foundation of China, National High-Level Talent Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aerodynamic performance of nacelle inlets under crosswind conditions is crucial for engine stability and efficiency. Current parametric investigations are predominantly focused on cruise operations, with minimal consideration given to crosswind conditions. This study employs an iCST-based parametric modeling approach to construct geometric models. A systematic examination of key geometric parameters—including the throat axial location, fan face radius, and leading-edge radii of the inner and outer contours is conducted. The reliability of the numerical methodology was established through a two-step validation process using both the iCST-generated non-axisymmetric model and the DLR-F6 benchmark model, followed by a geometric sensitivity analysis based on parametrically generated axisymmetric models. The results demonstrate that the inner contour leading-edge radius (ROC_I/R_hi) has the most substantial influence on flow separation. When ROC_I/R_hi decreases from 7.84% to 3.46%, the peak maximum circumferential total pressure distortion index (IDCmax) is increased by 86.78% with a 53.85% rearward shift in the complete reattachment mass flow rate. Correspondingly, a similar reduction in the outer contour leading-edge radius (ROC_O/R_hi) from 9.38% to 4.69% results in a 55.50% increase in peak IDCmax and a 33.33% rearward shift. Comparatively, the fan face radius shows minimal impact on flow distortion (increases by 9.72%), but more pronounced effects on total pressure recovery, while rearward movement of the throat axial location (35.00% to 69.00%) causes a 30.03% rise in IDCmax and 43.75% complete flow reattachment delay. It is concluded that the leading-edge optimization is crucial for crosswind resilience, with the inner contour geometry being particularly influential, providing parametric foundations for robust inlet design across a wide range of operating regimes. In addition, it is also found that the effects of Reynolds number (Re) lie in two folds: (1) For a fixed model scale, the aerodynamic performance of the inlet suffers a remarkable degradation with rapidly rising IDCmax as the crosswind velocity-based Re is increased to cause significant flow separations. (2) For a fixed crosswind velocity, the peak IDCmax progressively decreases with the increasing scale based Re, while σ exhibits an overall enhancement as Re rises.

Förderung

  • Aeronautical Science Foundation of China
  • National Natural Science Foundation of China
  • National High-Level Talent Project

Zitieren

APA

Song, X., Tang, B., Li, C., & Wu, Z. (2025). Effects of Nacelle Inlet Geometry on Crosswind Distortion Under Ground Static Conditions. Aerospace, 12(11), 955. https://doi.org/10.3390/aerospace12110955

Vancouver

Song X, Tang B, Li C, Wu Z. Effects of Nacelle Inlet Geometry on Crosswind Distortion Under Ground Static Conditions. Aerospace. 2025;12(11):955. doi:10.3390/aerospace12110955

BibTeX
@article{Song2025,
  author = {Song, Xiufeng and Tang, Binbin and Li, Changkun and Wu, Zhenlong},
  title = {Effects of Nacelle Inlet Geometry on Crosswind Distortion Under Ground Static Conditions},
  journal = {Aerospace},
  year = {2025},
  volume = {12},
  number = {11},
  pages = {955},
  doi = {10.3390/aerospace12110955}
}
Kostenlos starten →