Integrating Model-Based Systems Engineering into CubeSat Development: A Case Study of the BOREALIS Mission
Aerospace · 18.03.2025 · 12 (3) · 256
DOI: 10.3390/aerospace12030256 ↗Kurz gefasst
Fachartikel in der Zeitschrift Aerospace, online erschienen am 18.03.2025. Verfasst von Lorenzo Nardi und 23 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ASI, Tender Identification Code (CIG), Unique Project Code (CUP).
Abstract (Originalsprache)
The Biofilm Onboard Radiation Exposure Assessment Lab In Space (BOREALIS) mission is a 6U CubeSat initiative funded by the Italian Space Agency under the ALCOR program, executed through a collaboration among the School of Aerospace Engineering of Sapienza University of Rome, Interdepartmental Centre for Industrial Aerospace Research (CIRI Aerospace) of the University of Bologna and Kayser Italia Srl. BOREALIS is equipped with a lab-on-chip payload for studying the effects of microgravity and ionising radiation on microbial biofilms, which are crucial for understanding and preventing persistent infections in space environments. The satellite will operate across multiple orbits, moving from low to medium Earth orbit, to distinctly analyse the impacts of radiation separate from microgravity. The required orbital transfer not only tests the autonomy of its on-board systems in challenging conditions but also places BOREALIS among the first and few CubeSats to have ever attempted such a complex manoeuvre. This study explores the systematic application of Model-Based Systems Engineering to satellite design, from conceptualisation to trade-offs, using a tradespace analysis approach supported by Monte Carlo simulations to optimise mission configurations against performance and cost. Additionally, the adaptability of Model-Based Systems Engineering tools and the reusability of such an approach for other satellite projects are discussed, illustrating the BOREALIS mission as a case study for small mission design considering constraints and requirements.
Förderung
- ASI
- Tender Identification Code (CIG)
- Unique Project Code (CUP)
Zitieren
APA
Nardi, L., Carletta, S., Abbasrezaee, P., Palmerini, G., Lovecchio, N., Burgio, N., Santagata, A., Frullini, M., Calabria, D., Guardigli, M., Michelini, E., Calabretta, M. M., Zangheri, M., Lazzarini, E., Pace, A., Montalti, M., Mordini, D., Popova, L., Citraro, S., …, & Nascetti, A. (2025). Integrating Model-Based Systems Engineering into CubeSat Development: A Case Study of the BOREALIS Mission. Aerospace, 12(3), 256. https://doi.org/10.3390/aerospace12030256
Vancouver
Nardi L, Carletta S, Abbasrezaee P, Palmerini G, Lovecchio N, Burgio N, et al. Integrating Model-Based Systems Engineering into CubeSat Development: A Case Study of the BOREALIS Mission. Aerospace. 2025;12(3):256. doi:10.3390/aerospace12030256
BibTeX
@article{Nardi2025,
author = {Nardi, Lorenzo and Carletta, Stefano and Abbasrezaee, Parsa and Palmerini, Giovanni and Lovecchio, Nicola and Burgio, Nunzio and Santagata, Alfonso and Frullini, Massimo and Calabria, Donato and Guardigli, Massimo and Michelini, Elisa and Calabretta, Maria Maddalena and Zangheri, Martina and Lazzarini, Elisa and Pace, Andrea and Montalti, Marco and Mordini, Dario and Popova, Liyana and Citraro, Saverio and Billi, Daniela and Lorenzini, Fabio and Donati, Alessandro and Mirasoli, Mara and Nascetti, Augusto},
title = {Integrating Model-Based Systems Engineering into CubeSat Development: A Case Study of the BOREALIS Mission},
journal = {Aerospace},
year = {2025},
volume = {12},
number = {3},
pages = {256},
doi = {10.3390/aerospace12030256}
}
EUVIMED