EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Heat Transfer Model Based on Flow Pattern during Flow Boiling in Rectangular Microchannels

Jiamin Zhu, Peng Zhang, Sicong Tan, Tao Wang, Chaohong Guo, Yuyan Jiang

Aerospace · 06.09.2024 · 11 (9) · 733

DOI: 10.3390/aerospace11090733 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace, online erschienen am 06.09.2024. Verfasst von Jiamin Zhu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Beijing Institute of Technology Research Fund Program for Advanced Talents.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In thermal management applications using two-phase flow boiling, rectangular microchannels hold significant promise due to their ease of manufacturing and effective heat transfer characteristics. In this work, we combined experimental and theoretical analyses to propose a theoretical model based on thin liquid film evaporation for predicting heat transfer performance in rectangular cross-sectional microchannels. The heat transfer model is segmented into five zones based on two-phase flow patterns and transient liquid film thickness. These zones represent different flow boiling heat transfer mechanisms over time in microchannels: the liquid slug zone, elongated bubble zone, long-side wall dryout zone, corner liquid evaporation zone, and full dryout zone. The new model comprehensively explains experimental phenomena observed, including long-side wall dryout and thinning of the liquid film on the short-side wall. To validate our model, numerical solutions were computed to study the spatial and temporal variations in heat transfer coefficients. The results exhibited a consistent trend with experimental data regarding average heat transfer coefficients. We also analyzed factors influencing flow boiling characteristics, such as microchannel aspect ratio, hydraulic diameter, measurement location, fluid mass flux, and wall heat flux.

Förderung

  • National Natural Science Foundation of China
  • Beijing Institute of Technology Research Fund Program for Advanced Talents

Zitieren

APA

Zhu, J., Zhang, P., Tan, S., Wang, T., Guo, C., & Jiang, Y. (2024). Heat Transfer Model Based on Flow Pattern during Flow Boiling in Rectangular Microchannels. Aerospace, 11(9), 733. https://doi.org/10.3390/aerospace11090733

Vancouver

Zhu J, Zhang P, Tan S, Wang T, Guo C, Jiang Y. Heat Transfer Model Based on Flow Pattern during Flow Boiling in Rectangular Microchannels. Aerospace. 2024;11(9):733. doi:10.3390/aerospace11090733

BibTeX
@article{Zhu2024,
  author = {Zhu, Jiamin and Zhang, Peng and Tan, Sicong and Wang, Tao and Guo, Chaohong and Jiang, Yuyan},
  title = {Heat Transfer Model Based on Flow Pattern during Flow Boiling in Rectangular Microchannels},
  journal = {Aerospace},
  year = {2024},
  volume = {11},
  number = {9},
  pages = {733},
  doi = {10.3390/aerospace11090733}
}
Kostenlos starten →