EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Rotor Inflow, Tip Loss, and Aerodynamics Modeling on the Maximum Thrust Computation in Hover

Berend G. van der Wall

Aerospace · 29.04.2024 · 11 (5) · 357

DOI: 10.3390/aerospace11050357 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace, online erschienen am 29.04.2024. Verfasst von Berend G. van der Wall. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: DLR.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Comprehensive rotorcraft simulation codes are the workhorses for designing and simulating helicopters and their rotors under steady and unsteady operating conditions. These codes are also used to predict helicopters’ limits as they approach rotor stall conditions. This paper focuses on the prediction of maximum rotor thrust when hovering (due to stall limits) and the thrust and power characteristics when the collective control angle is further increased. The aerodynamic factors that may significantly affect the results are as follows: steady vs. unsteady aerodynamics, steady vs. dynamic stall, blade tip losses, curvature flow, yaw angle, inflow model, and blade-vortex interaction. The inflow model and tip losses are found to be the most important factors. For real-world applications vortex-based inflow models are considered the best choice, as they reflect the blade circulation distribution within the inflow distribution. Because the focus is on the impact of aerodynamic modeling on rotor stall, the blade design and its flexibility are intentionally not considered.

Förderung

  • DLR

Zitieren

APA

Wall, B. G. V. D. (2024). Influence of Rotor Inflow, Tip Loss, and Aerodynamics Modeling on the Maximum Thrust Computation in Hover. Aerospace, 11(5), 357. https://doi.org/10.3390/aerospace11050357

Vancouver

Wall BGVD. Influence of Rotor Inflow, Tip Loss, and Aerodynamics Modeling on the Maximum Thrust Computation in Hover. Aerospace. 2024;11(5):357. doi:10.3390/aerospace11050357

BibTeX
@article{Wall2024,
  author = {Wall, Berend G. van der},
  title = {Influence of Rotor Inflow, Tip Loss, and Aerodynamics Modeling on the Maximum Thrust Computation in Hover},
  journal = {Aerospace},
  year = {2024},
  volume = {11},
  number = {5},
  pages = {357},
  doi = {10.3390/aerospace11050357}
}
Kostenlos starten →