Rapid Tracking Satellite Servo Control for Three-Axis Satcom-on-the-Move Antenna
Aerospace · 26.04.2024 · 11 (5) · 345
DOI: 10.3390/aerospace11050345 ↗Kurz gefasst
Fachartikel in der Zeitschrift Aerospace, online erschienen am 26.04.2024. Verfasst von Jiao Ren und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Qin Chuang Yuan Construction of Two Chain Integration Special Project.
Abstract (Originalsprache)
To overcome the possible gimbal lock problem of the dual-axis satcom-on-the-move (SOTM) antenna, a three-axis tracking satellite SOTM antenna structure appears. The three-axis SOTM antenna is realized by adding a roll axis to the azimuth axis and pitch axis in the dual-axis SOTM structure. There is coupling among the azimuth axis, pitch axis and roll axis in the mechanical structure of the three-axis SOTM antenna, which makes the kinematic modeling of the antenna difficult. This paper introduces a three-axis SOTM antenna kinematic modeling method based on the modified Denavit–Hartenberg (MDH) method, named the new modified Denavit–Hartenberg (NMDH) method. In order to meet the modeling requirements of the MDH method, the NMDH method adds virtual coordinate systems and auxiliary coordinate systems to the three-axis SOTM antenna and obtains the kinematic model of the three-axis SOTM antenna. During the motion of the carrier, the SOTM antenna needs to adjust the antenna pointing in real time according to the changes of the location and attitude of the moving carrier. Therefore, this paper designs a servo control system based on the active disturbance rejection controller (ADRC), introducing a smooth and continuous ADRC fal function to enhance the tracking speed of the servo control system and reduce the overshoot of the output response. Finally, system experiments were carried out with a 60 cm caliber three-axis SOTM antenna. The experiment results show that the proposed servo control method achieves higher antenna tracking satellite accuracy and better communication effects.
Förderung
- Qin Chuang Yuan Construction of Two Chain Integration Special Project
Zitieren
APA
Ren, J., Ji, X., Han, L., Li, J., Song, S., & Wu, Y. (2024). Rapid Tracking Satellite Servo Control for Three-Axis Satcom-on-the-Move Antenna. Aerospace, 11(5), 345. https://doi.org/10.3390/aerospace11050345
Vancouver
Ren J, Ji X, Han L, Li J, Song S, Wu Y. Rapid Tracking Satellite Servo Control for Three-Axis Satcom-on-the-Move Antenna. Aerospace. 2024;11(5):345. doi:10.3390/aerospace11050345
BibTeX
@article{Ren2024,
author = {Ren, Jiao and Ji, Xiaoxiang and Han, Lei and Li, Jianghong and Song, Shubiao and Wu, Yafeng},
title = {Rapid Tracking Satellite Servo Control for Three-Axis Satcom-on-the-Move Antenna},
journal = {Aerospace},
year = {2024},
volume = {11},
number = {5},
pages = {345},
doi = {10.3390/aerospace11050345}
}
EUVIMED