LQR-Based Three-Output Static Feedback Controller Design for Vehicle Path Tracking
Actuators · 15.11.2026 · 15 (11) · 606
DOI: 10.3390/act15110606 ↗Kurz gefasst
Fachartikel in der Zeitschrift Actuators, online erschienen am 15.11.2026. Verfasst von Seongjin Yim und 2 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education.
Abstract (Originalsprache)
This paper presents an LQR-based method for calculating a three-output static output-feedback gain for vehicle path tracking. The original LQR is designed using preview lateral error, heading error, sideslip angle, and yaw rate, whereas the implemented controller uses only preview lateral error, heading error, and yaw rate. The proposed gain mapping retains the full-order controller synthesis without requiring a separate output-feedback optimization. Numerical verification shows that the mapping denominator remains between 1.094 and 1.163 and that the mapped full-order closed-loop stability margin remains positive across all four design cases. CarSim simulations quantify the quasi-steady sideslip reconstruction error and the effects of a 10 Hz steering actuator bandwidth, a 30° steering-angle limit, and a 30°/s steering-rate limit. In the demanding low-friction case, rate limitation increases the root-mean-square preview error of the mapped controller from 0.194 to 0.461 m. A redesigned sensitivity study distinguishes fixed-gain plant uncertainty, parameter-consistent controller redesign, and independent relative-weight variations. Under the tested conditions, independent variations in front- and rear-cornering stiffness produce larger response changes than variations in vehicle mass and yaw inertia. Thirty independent repetitions of covariance matrix adaptation evolution strategy optimization yield practically identical final solutions under both nominal and previously identified extreme design conditions. The proposed mapping therefore provides a practical means of retaining a validated full-order LQR design without sideslip feedback, although it does not guarantee universal robustness or static output-feedback optimality.
Förderung
- Ministry of Education
Zitieren
APA
Yim, S., Lee, I., & Nah, J. (2026). LQR-Based Three-Output Static Feedback Controller Design for Vehicle Path Tracking. Actuators, 15(11), 606. https://doi.org/10.3390/act15110606
Vancouver
Yim S, Lee I, Nah J. LQR-Based Three-Output Static Feedback Controller Design for Vehicle Path Tracking. Actuators. 2026;15(11):606. doi:10.3390/act15110606
BibTeX
@article{Yim2026,
author = {Yim, Seongjin and Lee, Ilhan and Nah, Jaewon},
title = {LQR-Based Three-Output Static Feedback Controller Design for Vehicle Path Tracking},
journal = {Actuators},
year = {2026},
volume = {15},
number = {11},
pages = {606},
doi = {10.3390/act15110606}
}
EUVIMED