EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Embedded Delay-Coordinate Predictive Damping for Speed Ripple Attenuation in a Motor–Reducer Flexible Drive

Jing Nie, Yong Li

Actuators · 03.11.2026 · 15 (11) · 582

DOI: 10.3390/act15110582 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Actuators, online erschienen am 03.11.2026. Verfasst von Jing Nie und 1 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Speed ripple attenuation in geared flexible drives requires control of synchronous components and residual fluctuations within an existing embedded control architecture. This paper develops a five-state delay-coordinate predictive damping controller (D5–PD) that adds auxiliary q-axis current to a proportional–integral (PI)-regulated drive. Direction-specific models are identified from drive speed history and auxiliary current records with exact delay shifts. A three-step output-weighted design is solved offline and deployed as five-coefficient feedback with scalar scheduling and current limits, at a 1 ms auxiliary update period on an F28379D. Experiments compare PI, six-branch multi-resonant control (MR), and D5–PD under six conditions with three runs per controller. At +300 r/min and +1 A, D5–PD reduces mean speed ripple root mean square (RMS) by 38.83% relative to PI and 5.61% relative to MR at nearly equal auxiliary command alternating-current (AC) RMS. Its load current-normalized responses at 2 and 8 Hz are 37.39% and 60.17% lower than MR without disturbance-specific retuning. Total ripple is lower than PI in all six conditions and MR in five; residual RMS is lower than MR throughout. A separate 0.20 A benchmark with six records per method gives 2.12% lower total ripple and 7.68% lower command RMS than proportional ripple damping. These results demonstrate an embedded auxiliary damping implementation and characterize its tradeoffs with frequency-selective and proportional feedback in terms of total ripple, residual fluctuations and command demand.

Zitieren

APA

Nie, J., & Li, Y. (2026). Embedded Delay-Coordinate Predictive Damping for Speed Ripple Attenuation in a Motor–Reducer Flexible Drive. Actuators, 15(11), 582. https://doi.org/10.3390/act15110582

Vancouver

Nie J, Li Y. Embedded Delay-Coordinate Predictive Damping for Speed Ripple Attenuation in a Motor–Reducer Flexible Drive. Actuators. 2026;15(11):582. doi:10.3390/act15110582

BibTeX
@article{Nie2026,
  author = {Nie, Jing and Li, Yong},
  title = {Embedded Delay-Coordinate Predictive Damping for Speed Ripple Attenuation in a Motor–Reducer Flexible Drive},
  journal = {Actuators},
  year = {2026},
  volume = {15},
  number = {11},
  pages = {582},
  doi = {10.3390/act15110582}
}
Kostenlos starten →