EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Monolithic Integration of Closed-Loop Thermal Actuation and Temperature Sensing in a Thin-Film System-on-Glass Designed for Culture and Electroanalytical Detection of Living Bacteria

Giulia Petrucci, Valentina Di Meo, Fabio Cappelli, Martina Baldini, Augusto Nascetti, Domenico Caputo, Nicola Lovecchio

Actuators · 02.11.2026 · 15 (11) · 578

DOI: 10.3390/act15110578 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Actuators, online erschienen am 02.11.2026. Verfasst von Giulia Petrucci und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Universities and Research, Sapienza University of Rome.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Point-of-care electroanalytical platforms for viable bacteria detection require local incubation and temperature control while maintaining compatibility with microfluidic handling and optical detection. This work presents a thin-film MEMS-based System-on-Glass (SoG) designed as a thermo-optical module for a four-site electrochemical bacterial-sensing platform. The SoG integrates a microfabricated double-spiral metal heater on one side of the glass substrate and six hydrogenated amorphous silicon (a-Si:H) temperature sensors along with eight complementary photosensors on the opposite side. The heater geometry was optimized through electrothermal simulations, which also established a linear relationship between the sensor and water temperature used to define the closed-loop setpoint. Infrared thermography on fabricated prototypes confirmed the simulated thermal distribution, yielding a mean temperature of 37.0 °C and a spatial variation from 36.4 to 37.7 °C across the active region. The temperature sensors showed a linear, reproducible response of approximately −4 mV/°C in two prototypes, while the photosensors exhibited dark currents in the 10−13 A range and a peak responsivity of 0.27–0.28 A/W at approximately 540–550 nm. Dedicated control software closed the loop between integrated sensing and actuation, regulating the temperature at 37 °C with an overshoot of 0.7 °C, a settling time of 140 s, and steady-state fluctuations confined within a single quantization step of the acquisition electronics. These results demonstrate the suitability of the SoG as a compact, controllable microscale thermo-optical platform for incubation, actuation, and complementary optical monitoring in point-of-care electroanalytical bacterial sensing.

Förderung

  • Ministry of Universities and Research
  • Sapienza University of Rome

Zitieren

APA

Petrucci, G., Meo, V. D., Cappelli, F., Baldini, M., Nascetti, A., Caputo, D., & Lovecchio, N. (2026). Monolithic Integration of Closed-Loop Thermal Actuation and Temperature Sensing in a Thin-Film System-on-Glass Designed for Culture and Electroanalytical Detection of Living Bacteria. Actuators, 15(11), 578. https://doi.org/10.3390/act15110578

Vancouver

Petrucci G, Meo VD, Cappelli F, Baldini M, Nascetti A, Caputo D, et al. Monolithic Integration of Closed-Loop Thermal Actuation and Temperature Sensing in a Thin-Film System-on-Glass Designed for Culture and Electroanalytical Detection of Living Bacteria. Actuators. 2026;15(11):578. doi:10.3390/act15110578

BibTeX
@article{Petrucci2026,
  author = {Petrucci, Giulia and Meo, Valentina Di and Cappelli, Fabio and Baldini, Martina and Nascetti, Augusto and Caputo, Domenico and Lovecchio, Nicola},
  title = {Monolithic Integration of Closed-Loop Thermal Actuation and Temperature Sensing in a Thin-Film System-on-Glass Designed for Culture and Electroanalytical Detection of Living Bacteria},
  journal = {Actuators},
  year = {2026},
  volume = {15},
  number = {11},
  pages = {578},
  doi = {10.3390/act15110578}
}
Kostenlos starten →