EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

LQ-Servo-Based Differential-Torque Control for Active Centering of Independently Rotating Wheelsets

Han-Woong Ahn, Ho-Joon Lee, Hyun-Jong Park

Actuators · 12.08.2026 · 15 (8) · 440

DOI: 10.3390/act15080440 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Actuators, online erschienen am 12.08.2026. Verfasst von Han-Woong Ahn und 2 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning, Ministry of Climate, Energy and Environment (MCEE) of the Republic of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Independently rotating wheelsets (IRWs) are increasingly adopted in low-floor urban rail vehicles because they enable compact bogie layouts and improved curving performance. However, their limited natural self-centering capability can lead to lateral offset from the track centerline, increased flange contact, and degraded lateral guidance performance. This paper presents an LQ-servo-based differential-torque control method for active centering of IRWs using a control-oriented state-space model derived from linearized wheel–rail creep-force relations. Rather than proposing a new control algorithm, this study establishes and experimentally validates an integrated modeling–control–validation framework for differential-torque active centering, providing new quantitative evidence of its effectiveness. The left and right wheel torques are employed as actuation inputs to regulate the lateral displacement of the wheelset, while a conventional proportional–integral–derivative (PID) controller is implemented as a baseline for comparison. The two controllers are evaluated through numerical simulations and validated experimentally using a 1/5-scale IRW roller rig. Compared with the PID controller, the LQ-servo controller achieves faster centering, improved yaw damping, and reduced steady-state lateral offset. In particular, under representative parameter variations, the fixed-gain PID controller loses stability, whereas the LQ-servo controller remains stable and maintains accurate centering, indicating lower sensitivity to the considered parameter variations in the simulation study, while the hardware experiments confirmed real-time implementation in the presence of unmodeled physical effects. These findings support the effectiveness of the proposed modeling and control approach for active centering of independently rotating wheelsets.

Förderung

  • Korea Institute of Energy Technology Evaluation and Planning
  • Ministry of Climate, Energy and Environment (MCEE) of the Republic of Korea

Zitieren

APA

Ahn, H., Lee, H., & Park, H. (2026). LQ-Servo-Based Differential-Torque Control for Active Centering of Independently Rotating Wheelsets. Actuators, 15(8), 440. https://doi.org/10.3390/act15080440

Vancouver

Ahn H, Lee H, Park H. LQ-Servo-Based Differential-Torque Control for Active Centering of Independently Rotating Wheelsets. Actuators. 2026;15(8):440. doi:10.3390/act15080440

BibTeX
@article{Ahn2026,
  author = {Ahn, Han-Woong and Lee, Ho-Joon and Park, Hyun-Jong},
  title = {LQ-Servo-Based Differential-Torque Control for Active Centering of Independently Rotating Wheelsets},
  journal = {Actuators},
  year = {2026},
  volume = {15},
  number = {8},
  pages = {440},
  doi = {10.3390/act15080440}
}
Kostenlos starten →