Integrated Control of EV Battery Chargers for Virtual Inertia and Vehicle-to-Grid Support Using Hybrid Energy Storage
Actuators · 19.06.2026 · 15 (6) · 352
DOI: 10.3390/act15060352 ↗Kurz gefasst
Fachartikel in der Zeitschrift Actuators, online erschienen am 19.06.2026. Verfasst von Chandra Babu Guttikonda und 6 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The increasing penetration of renewable energy sources and converter-interfaced loads has intensified the need for fast and reliable grid-support services. Although electric vehicle (EV) battery chargers have emerged as promising resources for Vehicle-to-Grid (V2G) applications, existing solutions typically focus on individual services such as virtual inertia or frequency regulation, while limited attention has been given to the coordinated provision of multiple ancillary services within a unified framework. Furthermore, the use of batteries alone for fast frequency support may accelerate battery degradation due to frequent high-power transients. To address these challenges, this paper proposes a hybrid energy storage-based EV battery charger architecture and a coordinated multi-timescale control strategy capable of simultaneously providing virtual inertia support, long-term frequency regulation, reactive power compensation, and harmonic mitigation. The proposed approach utilizes a DC-link capacitor to deliver fast inertial response while the battery supplies sustained frequency support, thereby reducing battery stress and improving energy management efficiency. An enhanced frequency estimation method based on a phase-locked loop combined with a low-pass filter is also introduced to improve dynamic performance. Simulation results demonstrate the effectiveness of the proposed strategy under various grid disturbances. The system achieves an equivalent virtual inertia constant of approximately 1.85 s and delivers up to 786 W of transient inertial support within 80 ms during frequency events. The enhanced frequency estimation method significantly reduces transient overshoot, while harmonic compensation limits the grid current and voltage total harmonic distortion to 1.50% and 3.23%, respectively. In addition, the controller provides up to 400 VAR of reactive power support during voltage disturbances while maintaining stable battery operation. These results demonstrate that the proposed EV battery charger can function as a multifunctional grid-support resource, enhancing frequency stability, voltage regulation, power quality, and overall V2G capability in future smart grids.
Zitieren
APA
Guttikonda, C. B., Varma, P. S., Kumar, M. K., Rao, K. V. G., Choi, J. H., Prasad, E. S., & Reddy, C. R. (2026). Integrated Control of EV Battery Chargers for Virtual Inertia and Vehicle-to-Grid Support Using Hybrid Energy Storage. Actuators, 15(6), 352. https://doi.org/10.3390/act15060352
Vancouver
Guttikonda CB, Varma PS, Kumar MK, Rao KVG, Choi JH, Prasad ES, et al. Integrated Control of EV Battery Chargers for Virtual Inertia and Vehicle-to-Grid Support Using Hybrid Energy Storage. Actuators. 2026;15(6):352. doi:10.3390/act15060352
BibTeX
@article{Guttikonda2026,
author = {Guttikonda, Chandra Babu and Varma, Pinni Srinivasa and Kumar, Malligunta Kiran and Rao, K. V. Govardhan and Choi, Joon Ho and Prasad, E. Shiva and Reddy, Ch. Rami},
title = {Integrated Control of EV Battery Chargers for Virtual Inertia and Vehicle-to-Grid Support Using Hybrid Energy Storage},
journal = {Actuators},
year = {2026},
volume = {15},
number = {6},
pages = {352},
doi = {10.3390/act15060352}
}
EUVIMED