EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Coordinated Control Strategy of DHT Mode Switching Based on Multiple Power Sources

Zhigang Zhang, Hao Yang, Xiaosong Wang, Zhige Chen, Hai Qing, Xiaolin Tang

Actuators · 13.04.2026 · 15 (4) · 217

DOI: 10.3390/act15040217 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Actuators, online erschienen am 13.04.2026. Verfasst von Zhigang Zhang und 5 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, the Fundamental Research Funds for the Central Universities, the Program for Innovation Team at Institution of Higher Education in Chongqing.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To suppress the severe output torque fluctuations caused by clutch engagement when a hybrid electric vehicle equipped with a dedicated hybrid transmission (DHT) switches from pure electric (E) drive mode to hybrid (H) drive mode, a coordinated control method for power source switching is proposed. First, an adaptive fuzzy proportional-integral (PI) controller regulates the engine speed based on the speed difference between the engine and the P2 motor. Second, an active disturbance rejection control (ADRC) controller is employed for trajectory tracking to eliminate the speed difference across the synchronizer’s friction surfaces. This compensates for clutch torque variations during engine startup and ensures rapid synchronizer engagement. Finally, the torque interruption caused by the decoupling of the engine and P2 motor from the driveline is compensated via feedforward control from the P3 motor. The proposed strategy was validated through MATLAB Simulink simulations and CANape calibration tests. The results indicate that applying the proposed method to E-H mode switching slightly extended the total duration by 0.02 s. However, compared with uncoordinated control, the maximum longitudinal jerk was reduced by 73.8%, and the clutch sliding work decreased by 38.6%. This significantly enhances switching smoothness and prolongs the clutch’s service life.

Förderung

  • the National Natural Science Foundation of China
  • the Fundamental Research Funds for the Central Universities
  • the Program for Innovation Team at Institution of Higher Education in Chongqing
  • the Program for Chongqing Talent Scheme
  • the Open Research Project of the Key Laboratory of Advanced Manufacture Technology for Automobile Parts

Zitieren

APA

Zhang, Z., Yang, H., Wang, X., Chen, Z., Qing, H., & Tang, X. (2026). Research on Coordinated Control Strategy of DHT Mode Switching Based on Multiple Power Sources. Actuators, 15(4), 217. https://doi.org/10.3390/act15040217

Vancouver

Zhang Z, Yang H, Wang X, Chen Z, Qing H, Tang X. Research on Coordinated Control Strategy of DHT Mode Switching Based on Multiple Power Sources. Actuators. 2026;15(4):217. doi:10.3390/act15040217

BibTeX
@article{Zhang2026,
  author = {Zhang, Zhigang and Yang, Hao and Wang, Xiaosong and Chen, Zhige and Qing, Hai and Tang, Xiaolin},
  title = {Research on Coordinated Control Strategy of DHT Mode Switching Based on Multiple Power Sources},
  journal = {Actuators},
  year = {2026},
  volume = {15},
  number = {4},
  pages = {217},
  doi = {10.3390/act15040217}
}
Kostenlos starten →